Precipitation of grain boundary α in a laser deposited compositionally graded Ti-8Al-xV alloy -: an orientation microscopy study

被引：87

作者：

Banerjee, R ^{[1
]}

Bhattacharyya, D ^{[1
]}

Collins, PC ^{[1
]}

Viswanathan, GB ^{[1
]}

Fraser, HL ^{[1
]}

机构：

[1] Ohio State Univ, Dept Mat Sci & Engn, Columbus, OH 43210 USA

来源：

ACTA MATERIALIA | 2004年 / 52卷 / 02期

关键词：

laser deposition; titanium alloys; aluminium; scanning electron microscopy; transmission electron microscopy;

D O I：

10.1016/j.actamat.2003.09.038

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A graded ternary Ti-8Al-xV alloy (all compositions in wt%) has been deposited using the laser engineered net-shaping (LENS(TM)) process. A compositional gradient in the alloy, from binary Ti-8Al to Ti-8Al-20V, has been achieved within a length of similar to25 mm. The feedstock used for depositing the graded alloy consisted of elemental Ti, Al, and V powders. Due to the columnar growth morphology of the beta grains in these LENS(TM) deposited Ti alloys, the same prior beta grain boundary often extends across lengths similar to10 mm. Using orientation microscopy techniques in a scanning electron microscope, the crystallography of precipitation of grain boundary alpha across the same boundary with changing composition has been investigated in detail. It was observed that while most grain boundary alpha precipitates maintain a Burgers or near-Burgers orientation relationship with only one of the beta grains, a few of these precipitates develop a Burgers orientation relationship with the other beta grain. In some rare instances, the grain boundary alpha did not develop a Burgers or near-Burgers orientation relationship with either beta grains. Interestingly, in many cases while the grain boundary alpha maintained Burgers relationship with one of the beta grains, precipitates of two different variants decorated the boundary, in a near-alternate fashion. (C) 2003 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：377 / 385

页数：9

共 21 条

[11] Understanding thermal behavior in the LENS process [J].

Griffith, ML ;

Schlienger, ME ;

Harwell, LD ;

Oliver, MS ;

Baldwin, MD ;

Ensz, MT ;

Essien, M ;

Brooks, J ;

Robino, CV ;

Smugeresky, JE ;

Hofmeister, WH ;

Wert, MJ ;

Nelson, DV .

MATERIALS & DESIGN, 1999, 20 (2-3) :107-113

[12] INFLUENCE OF FACETING UPON EQUILIBRIUM SHAPE OF NUCLEI AT GRAIN-BOUNDARIES .1. 2-DIMENSIONS [J].

LEE, JK ;

AARONSON, HI .

ACTA METALLURGICA, 1975, 23 (07) :799-808

[13]

LEE JK, 1975, ACTA METALL MATER, V23, P809, DOI 10.1016/0001-6160(75)90197-2

[14]

Lewis G.K., 1995, LAUR952845

[15] Titanium alloys in total joint replacement - a materials science perspective [J].

Long, M ;

Rack, HJ .

BIOMATERIALS, 1998, 19 (18) :1621-1639

[16] Toward the overthrow of half of a major paradigm for interfacial structure deduction, with special attention to the massive transformation in Ti-46.5 A/O Al alloy [J].

Nie, JF ;

Muddle, BC ;

Furuhara, T ;

Aaronson, HI .

SCRIPTA MATERIALIA, 1998, 39 (4-5) :637-645

[17] CRYSTALLOGRAPHY AND MORPHOLOGY OF THE BETA-]ZETA MASSIVE TRANSFORMATION IN AG-26 A-O AL .2. [J].

PLICHTA, MR ;

AARONSON, HI .

ACTA METALLURGICA, 1980, 28 (08) :1041-1057

[18] Direct laser deposition of alloys from elemental powder blends [J].

Schwendner, KI ;

Banerjee, R ;

Collins, PC ;

Brice, CA ;

Fraser, HL .

SCRIPTA MATERIALIA, 2001, 45 (10) :1123-1129

[19]

SMITH CS, 1953, T AM SOC METAL, V45, P533

[20]

STEEN WM, 1993, P SOC PHOTO-OPT INS, V1990, P278

← 1 2 3 →