A theoretical and experimental investigation of surface generation in diamond turning of an A16061/SiCp metal matrix composite

被引：60

作者：

Chan, KC ^{[1
]}

Cheung, CF ^{[1
]}

Ramesh, MV ^{[1
]}

Lee, WB ^{[1
]}

To, S ^{[1
]}

机构：

[1] Hong Kong Polytech Univ, Dept Mfg Engn, Kowloon, Hong Kong, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2001年 / 43卷 / 09期

关键词：

cutting mechanics; finite element method; metal-matrix composite; power spectrum analysis; surface generation; swelling; ultra-precision machining;

D O I：

10.1016/S0020-7403(01)00028-5

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper, the surface generation in ultra-precision diamond turning of Al6061/15SiC(p) metal-matrix composites was investigated based on different analytical approaches which include parametric analysis, cutting mechanic analysis, finite element method (FEM) analysis and power spectrum analysis. Parametric analysis was performed to explore the in situ inter-relationships between the process parameters and the surface roughness. The surface properties of the diamond turned surface were extracted and analyzed by the power spectrum analysis of the surface roughness profiles. Different surface generation mechanisms were deduced based on the cutting mechanics and FEM analysis. The results of the theoretical analyses were verified through a series of cutting tests conducted under various cutting conditions and a good correlation between the theoretical and experimental results was obtained. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：2047 / 2068

页数：22

共 30 条

[1]

[Anonymous], ANN CIRP

[2] A parametric analysis of surface quality in diamond turning of an Al6061/SiCp metal matrix composite [J].

Chan, KC ;

Ramesh, MV ;

Lee, WB ;

Cheung, CF .

ADVANCES IN ENGINEERING PLASTICITY, PTS 1-2, 2000, 177-1 :369-374

[3] Study of factors affecting the surface quality in ultra-precision diamond turning [J].

Cheung, CF ;

Lee, WB .

MATERIALS AND MANUFACTURING PROCESSES, 2000, 15 (04) :481-502

[4] A multi-spectrum analysis of surface roughness formation in ultra-precision machining [J].

Cheung, CF ;

Lee, WB .

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2000, 24 (01) :77-87

[5] A theoretical and experimental investigation of surface roughness formation in ultra-precision diamond turning [J].

Cheung, CF ;

Lee, WB .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (07) :979-1002

[6] Machining of Al/SiC particulate metal-matrix composites - Part I: Tool performance [J].

El-Gallab, M ;

Sklad, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 83 (1-3) :151-158

[7]

Evans C., 1991, CIRP Ann.-Manuf. Technol., V40, P571, DOI DOI 10.1016/S0007-8506(07)62056-3

[8]

Furukawa Y., 1988, CIRP Ann., V37, P113, DOI DOI 10.1016/S0007-8506

[9] Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites [J].

Lin, JT ;

Bhattacharyya, D ;

Ferguson, WG .

COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (02) :285-291

[10] THE TURNING OF AN AL/SIC METAL-MATRIX COMPOSITE [J].

LOONEY, LA ;

MONAGHAN, JM ;

OREILLY, P ;

TAPLIN, DMR .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1992, 33 (04) :453-468

← 1 2 3 →