Geotechnical characterization of a landslide in a Blue Clay slope

This paper describes the results of an experimental, as well as theoretical, analysis of a landslide in a clay slope at the margin of a small town of Southern Italy, whose reactivation of 1998 caused severe damages to some structures. To protect the upslope urban area, an anchored diaphragm wall and a drainage system were constructed in 2001. In the meantime, in order to understand the processes which caused the reactivation, a Department of the Basilicata Administrative Region provided financial support to a geotechnical investigation. Laboratory tests on undisturbed and reconstituted specimens, in situ pore pressure and deep displacement measurements were carried out. Both experimental and theoretical in situ water content (and porosity) profiles were determined. Theoretical analyses of pore pressure distribution and stability analyses were carried out. The influence of the drainage system on the slope safety factor was evaluated. Experimental and theoretical data suggest that a first time process occurred in the lower part of the landslide system. The upper part moved on pre-existing surfaces on which an average shear strength close to the residual strength was available. Noticeable water content increase was found around some of these surfaces. Erosion at the toe of the landslide was the probable cause of reactivation. The analysis of the drain system effectiveness suggests that drainage has not significantly influenced pore pressures on the considered slip surfaces yet, mainly because of the very low permeability of the clay.