Coke, char and organic waste behaviour in the blast furnace with high injection rate

被引:10
作者
Gudenau, HW
Senk, D
Fukada, K
Babich, A
Froehling, C
García, LL
Formoso, A
Alguacil, FJ
Cores, A
机构
[1] Univ Aachen, Dept Ferrous Met, D-52056 Aachen, Germany
[2] JFE Steel Corp, Ironmaking & Environm Proc Res Dept, Hiroshima, Japan
[3] Ctr Invest Met, Havana 23611, Cuba
[4] CSIC, Ctr Nacl Invest Met, E-28040 Madrid, Spain
关键词
blast furnace; coke; degradation; tuyere injection; auxiliary hydrocarbons;
D O I
10.3989/revmetalm.2003.v39.i5.349
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Blast furnace operation with low coke rate, high amount of auxiliary hydrocarbons and use of nut coke causes a change in coke quality requirements. In particular, not burned in the raceway residues of injected substances (char and ash) can influence the coke behaviour. Therefore combustion efficiency of various organic wastes with and without pulverized coal injection (PCI) and coal char has been investigated under the raceway simulation conditions. Mixing of various substances improves their combustion efficiency. Study on coke gasification by carbon dioxide in the presence of char showed that with the increase of char concentration, coke strength reduction becomes smaller. The reactivity of char with CO2 is higher than that of coke. Therefore char is consumed preferentially. In presence of injected char, total pore volume in coke and its wear resistance were increased. Coke reactivity and microstructure in the presence of various kinds of ash has been studied. Many ash spheres were observed on the surface of coke matrix and its size was dependent on ash properties.
引用
收藏
页码:367 / 377
页数:11
相关论文
共 28 条
[1]  
ALTPETER W, 1988, STAHL EISEN, V108, P781
[2]   Blast furnace coke quality in the European Union [J].
Alvarez, R ;
García-Cimadevilla, JL ;
Díez, MA ;
Bermúdez, J ;
Alonso, V ;
Puente, E .
REVISTA DE METALURGIA, 2002, 38 (05) :380-387
[3]   Technological improvements in the pulverized coal injection process in the blast furnace [J].
Babich, A ;
Yaroshevskii, S ;
Garcia, L ;
Formoso, A ;
Cores, A ;
Isidro, A ;
Ferreira, S .
REVISTA DE METALURGIA, 1996, 32 (02) :103-116
[4]   Increase of pulverized coal use efficiency in blast furnace [J].
Babich, A ;
Yaroshevskii, S ;
Formoso, A ;
Isidro, A ;
Ferreira, S ;
Cores, A ;
Garcia, L .
ISIJ INTERNATIONAL, 1996, 36 (10) :1250-1258
[5]  
BABICH A, 2003, P 3 INT C SCI TECHN, P89
[6]  
BABICH A, 2002, P INT BLAST FURN LOW
[7]  
BABICH AI, 1993, INTENSIFYING PULVERI, P200
[8]   Development of a new laboratory-scale method for the determination of coke mechanical strength [J].
Díez, MA ;
Alvarez, R ;
Radoslavov, N ;
Barriocanal, C ;
Canga, CS ;
Xiberta, J .
REVISTA DE METALURGIA, 2002, 38 (06) :410-418
[9]  
FORMOSO A, 2001, REV METAL MADRID, V37, P423
[10]  
FORMOSO A, 1998, 7210AA938 ECSC