Impact and tensile properties of PLA/Cordenka and PLA/flax composites

被引:490
作者
Bax, Benjamin [1 ]
Muessig, Joerg [1 ]
机构
[1] Univ Appl Sci, Hsch Bremen, D-28199 Bremen, Germany
关键词
short-fibre composites; impact behaviour; scanning electron microscopy (SEM); injection moulding; natural fibre;
D O I
10.1016/j.compscitech.2008.01.004
中图分类号
TB33 [复合材料];
学科分类号
摘要
The interest for biodegradable polymers and natural fibre-reinforced polymers has recently grown because of increasing environmental concerns. But the impact properties of bast fibres reinforced polymers cannot reach the levels of traditional fibre-reinforced polymers. PLA (polylactic acid) was reinforced with Cordenka rayon fibres and flax fibres, respectively. The mechanical properties of these composites which are examples for completely biodegradable composites were tested and compared. The samples were produced using injection moulding. The highest impact strength (72 kJ/m(2)) and tensile strength (58 MPa) were found for Cordenka reinforced PLA at a fibre-mass proportion of 30%. The highest Young's modulus (6.31 GPa) was found for the composite made of PLA and flax. A poor adhesion between the matrix and the fibres was shown for both composites using SEM. The promising impact properties of the presented PLA/Cordenka composites show their potential as an alternative to traditional composites. (c) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1601 / 1607
页数:7
相关论文
共 22 条
[1]  
[Anonymous], 2006, BIOPLASTICS, V1, P18
[2]  
BOS HL, 2005, COMPOS PART A-APPL S, V37, P1591
[3]  
*CORD GMBH, 2007, CORD 700 SUP 3
[4]  
*FAR E TEXT LTD, 2006, NONW FIBR ING FIBR S
[5]  
FRANCO PJH, 2005, NATURAL FIBRES BIOPO
[6]   Novel cellulose fibre reinforced thermoplastic materials [J].
Ganster, Johannes ;
Fink, Hans-Peter .
CELLULOSE, 2006, 13 (03) :271-280
[7]  
HEINEMANN M, 2005, EIGENSCHAFTEN ANWEND, V19
[8]  
Henton D.E., 2005, NATURAL FIBRES BIOPO
[9]  
KARUS M, 2005, KUNSTST-PLAST EUR, V7, P1
[10]  
Lampke T., 2001, THESIS TU CHEMNITZ