RF magnetic shielding effect of a sealed bottom HTS cylinder

被引:10
作者
Itoh, K [1 ]
Hotta, Y
Itoh, M
Munser, N
Plewa, J
Jaszczuk, W
Altenburg, H
机构
[1] Kinki Univ, Grad Sch, Div Elect Engn, Higashiosaka, Osaka 5778502, Japan
[2] Tokin EMC Co Ltd, EMC Tech Ctr, Kawasaki, Kanagawa 2130023, Japan
[3] Univ Munster Appl Sci, Dept Chem Engn, D-48565 Munster, Steinfurt, Germany
[4] Steinfurter Initiat Mat Forsch eV, D-48565 Steinfurt, Germany
关键词
electromagnetic shielding; RF electric shield; RF magnetic shield; sealed bottom HTS cylinder;
D O I
10.1109/77.920344
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The high-critical temperature superconductor (HTS) is an ideal material for use as a RF magnetic shielding vessel, which employs perfect diamagnetism. In general, however, the detailed characteristics of the radio frequency (RF) for a HTS vessel are unknown. In the present research, measurements are made of the RF shielding effect SD, that is, the ratio of the output powers of the receiving antenna with and without the shielding vessel, of a sealed bottom YBCO bulk cylinder. It was found that the values of the magnetic shielding effect SDH for the sealed bottom YBCO cylinder exhibit constant values in frequency range from 1 MHz to 10 MHz, and decrease with an increase in frequency from 30 MHz to 300 MHz of the applied electromagnetic wave. It was also found that the shielding displayed no evidence of dependence on the RF magnetic power P-H. For the RF electric shielding effect SDE, the cylinder exhibited no remarkable characteristics. Furthermore, it was found that the characteristics of SDE for the cylinder displayed no evidence of dependence on the values of the RF output power P-E. In addition, the shielding effects were shown to be improved by the superposition of a sealed bottom copper cylinder over the sealed bottom YBCO cylinder.
引用
收藏
页码:2394 / 2397
页数:4
相关论文
共 9 条
[1]  
Itoh M., 1995, Transactions of the Institute of Electrical Engineers of Japan, Part C, V115-C, P696
[2]  
ITOH M, 1994, ADV CRYOG ENG, V40, P261
[3]  
ITOH M, 2000, APPL SUPERCOND, V2, P777
[4]  
ITOH M, 2000, APPL SUPERCOND, V2, P781
[5]   Magnetic evaluation of HTS magnetic shielding cylinders using an HTS dc-SQUID [J].
Mori, K ;
Minemoto, T ;
Itoh, M .
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1999, 9 (02) :4377-4380
[6]  
OHYAMA T, 1994, ADV CRYOG ENG, V40, P245
[7]   Thermal investigations of reactive powder mixtures as precursors for melt-processing of YBa2Cu3O7-x [J].
Plewa, J ;
DiBenedetto, A ;
Altenburg, H ;
Esser, G ;
Kugeler, O ;
Schmitz, GJ .
JOURNAL OF THERMAL ANALYSIS, 1997, 48 (05) :1011-1026
[8]   THERMOANALYTICAL FEATURES OF YBA2CU3O7-X [J].
PLEWA, J ;
ALTENBURG, H ;
HAUCK, J .
THERMOCHIMICA ACTA, 1995, 255 :177-190
[9]  
PLEWA J, 1997, APPL SUPERCOND, V2, P1683