On the toughening of brittle materials by grain bridging: Promoting intergranular fracture through grain angle, strength, and toughness

被引:56
作者
Foulk, J. W., III [5 ]
Johnson, G. C. [4 ]
Klein, P. A. [3 ]
Ritchie, R. O. [1 ,2 ]
机构
[1] Univ Calif Berkeley, Dept Mat Sci & Engn, Berkeley, CA 94720 USA
[2] Lawrence Berkeley Natl Lab, Div Mat Sci, Berkeley, CA 94720 USA
[3] Franklin Templeton Investments, San Mateo, CA 94403 USA
[4] Univ Calif Berkeley, Dept Mech Engn, Berkeley, CA 94720 USA
[5] Sandia Natl Labs, Livermore, CA 94550 USA
关键词
fracture mechanisms; fracture toughness; ceramics; finite elements; crack bridging;
D O I
10.1016/j.jmps.2007.12.006
中图分类号
T [工业技术];
学科分类号
08 [工学];
摘要
The structural reliability of many brittle materials such as structural ceramics relies on the occurrence of intergranular, as opposed to transgranular, fracture in order to induce toughening by grain bridging. For a constant grain boundary strength and grain boundary toughness, the current work examines the role of grain strength, grain toughness, and grain angle in promoting intergranular fracture in order to maintain such toughening. Previous studies have illustrated that an intergranular path and the consequent grain bridging process can be partitioned into five distinct regimes, namely: propagate, kink, arrest, stall, and bridge. To determine the validity of the assumed intergranular path, the classical penetration/deflection problem of a crack impinging on an interface is re-examined within a cohesive zone framework for intergranular and transgranular fracture. Results considering both modes of propagation, i.e., a transgranular and intergranular path, reveal that crack-tip shielding is a natural outcome of the cohesive zone approach to fracture. Cohesive zone growth in one mode shields the opposing mode from the stresses required for cohesive zone initiation. Although stable propagation occurs when the required driving force is equivalent to the toughness for either transgranular or intergranular fracture, the mode of propagation depends on the normalized grain strength, normalized grain toughness, and grain angle. For each grain angle, the intersection of single path and multiple path solutions demarcates "strong" grains that increase the macroscopic toughness and "weak" grains that decrease it. The unstable transition to intergranular fracture reveals that an increasing grain toughness requires a growing region of the transgranular cohesive zone be near the cohesive strength. The inability of the body to provide the requisite stress field yields an overdriven and unstable configuration. The current results provide restrictions for the achievement of substantial toughening through intergranular fracture. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2381 / 2400
页数:20
相关论文
共 35 条
[1]
Crack growth in lamellar titanium aluminide [J].
Arata, JJM ;
Kumar, KS ;
Curtin, WA ;
Needleman, A .
INTERNATIONAL JOURNAL OF FRACTURE, 2001, 111 (02) :163-189
[2]
Effects of microstructure on the strength and fracture toughness of polysilicon: A wafer level testing approach [J].
Ballarini, R ;
Kahn, H ;
Tayebi, N ;
Heuer, AH .
MECHANICAL PROPERTIES OF STRUCTURAL FILMS, 2001, 1413 :37-51
[3]
Influence of reinforcement content and diameter on the R-curve response in SiC-whisker-reinforced alumina [J].
Becher, PF ;
Hsueh, CH ;
Alexander, KB ;
Sun, EY .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (02) :298-304
[4]
Becher PF, 1998, J AM CERAM SOC, V81, P2821, DOI 10.1111/j.1151-2916.1998.tb02702.x
[5]
The fracture resistance of a binary TiAl alloy [J].
Chan, KS ;
Onstott, J ;
Kumar, KS .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (01) :71-80
[6]
ROLE OF GRAIN-SIZE IN THE STRENGTH AND R-CURVE PROPERTIES OF ALUMINA [J].
CHANTIKUL, P ;
BENNISON, SJ ;
LAWN, BR .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (08) :2419-2427
[7]
SLIGHTLY CURVED OR KINKED CRACKS [J].
COTTERELL, B ;
RICE, JR .
INTERNATIONAL JOURNAL OF FRACTURE, 1980, 16 (02) :155-169
[9]
A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part II: Numerical examples [J].
Espinosa, HD ;
Zavattieri, PD .
MECHANICS OF MATERIALS, 2003, 35 (3-6) :365-394
[10]
ESPINOSA HD, 2003, MECH MATER, V35, P323