On the measurement of the tensile strength of soft rocks

This paper reports on a comparative study of various types of experimental tests for measuring the tensile strength of rocks and rock-like materials. A critical assessment is presented of some widely used laboratory techniques on the basis of experimental data from the literature and from the laboratory investigation performed in this study. Tests were carried out using a triaxial apparatus recently set up at Milan University of Technology. This was designed to reduce random misalignments between specimen and loading frame, which are typical of conventional triaxial cells with external tie bars. The apparatus was then modified to perform various types of tests for determining the tensile strength of materials. An artificial building stone and a natural calcarenite of the Gravina di Puglia geological formation, sampled at Montescaglioso (Matera-Italy) were tested in this research. The experimental investigation included various types of tests, namely the uni-axial, the Brazilian, the ring, the three and four points bending and the Luong test. Specimens of both materials were also compressed to failure in unconfined conditions and loaded cyclically in unconfined tension and compression, Young's moduli being measured by means of local instrumentation.