Analysis of tool and workpiece interaction in diamond turning using graphical analysis of acoustic emission

被引：17

作者：

Dornfeld, DA ^{[1
]}

Oliveira, JFG

Lee, D

Valente, CMO

机构：

[1] Univ Calif Berkeley, Lab Mfg Automat, Berkeley, CA 94720 USA

[2] Univ Sao Paulo, Sao Carlos, SP, Brazil

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2003年 / 52卷 / 01期

关键词：

precision turning; monitoring; acoustic emission;

D O I：

10.1016/S0007-8506(07)60630-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The surface quality obtained in diamond turning operations is highly influenced by the interaction between the tool and workpiece. These influences include changes in cuffing forces, chip formation phenomena, microstructure of workpiece, and others. Local changes in the depth of cut and material properties lead to variable cutting forces that may result in unacceptable form errors. This research proposes an innovative approach for mapping the AE RMS generated during diamond turning able to graphically represent several features of the interaction between tool and workpiece related to instant depth of cut distribution, grain boundaries and grain orientation.

引用

页码：479 / 482

页数：4

共 12 条

[1] Generation and texture of surfaces in ultraprecision cutting of copper [J].

Brinksmeier, E ;

Schmütz, J .

MACHINING SCIENCE AND TECHNOLOGY, 1997, 1 (02) :185-193

[2]

BYRNE G, 1995, ANN CIRP, V44, P541

[3]

Evans C., 1987, Proceedings of the SPIE - The International Society for Optical Engineering, V802, P52, DOI 10.1117/12.967102

[4]

Furukawa Y., 1988, CIRP Ann., V37, P113, DOI DOI 10.1016/S0007-8506

[5]

LEE Y, 2000, THESIS U CALIFORNIA

[6]

Moriwaki T, 1995, INT J JPN S PREC ENG, V29, P287

[7]

OLIVEIRA JFG, 2001, CIRP ANN-MANUF TECHN, V50, P217

[8]

OLIVEIRA JFG, 1994, CIRP ANN-MANUF TECHN, V43, P291

[9]

Ueda K., 1980, ANN CIRP, V29, P41, DOI [10.1016/S0007-8506(07)61292-X, DOI 10.1016/S0007-8506(07)61292-X]

[10]

VALENTE C, 2002, P 2002 ASPE ANN M ST, P607

← 1 2 →