Crystallization Behaviour of some Steelmaking Slags

被引:104
作者
Engstrom, F. [1 ]
Adolfsson, D. [1 ]
Yang, Q. [1 ]
Samuelsson, C. [1 ]
Bjorkman, B. [1 ]
机构
[1] Lulea Univ Technol, Div Proc Met, S-97187 Lulea, Sweden
关键词
steel slag; modifications; cooling rate; crystallization; matrix;
D O I
10.1002/srin.200900154
中图分类号
TF [冶金工业];
学科分类号
080601 [冶金物理化学];
摘要
The present study was aimed at highlighting the final properties of two different steelmaking slags which undergo different cooling rates. The experiments were conducted in laboratory scale using an induction furnace. One of the slags originates from an electric arc furnace (EAF) (high-alloyed) and the second slag from a basic oxygen furnace (BOF). The treatment of the slag included re-melting along with different cooling rates. The material collected from the tests was characterized through X-ray diffraction, scanning electron microscopy as well as thermodynamic calculations which were compared with experimental results, for confirmation. The results indicate that both the EAF and BOF slags show increased reactivity with water, as well as a decrease in crystal size when rapid cooling is applied. The wustite-type solid solution (Mg,Fe,Mn)O varies in composition depending on the cooling conditions. Metastable Ca3SiO5 was found in the rapidly- cooled BOF slag.
引用
收藏
页码:362 / 371
页数:10
相关论文
共 18 条
[1]
ABELENGH T, 1992, PRINCIPLES METAL REF
[2]
FactSage thermochemical software and databases [J].
Bale, C ;
Chartrand, P ;
Degterov, SA ;
Eriksson, G ;
Hack, K ;
Ben Mahfoud, R ;
Melançon, J ;
Pelton, AD ;
Petersen, S .
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 2002, 26 (02) :189-228
[3]
BREDIG MA, 1948, J AM CERAM SOC, V33, P188
[4]
DAUGHERTY KennethE., 1983, Silicates Industriels, V48, P107
[5]
Hot stage processing of metallurgical slags [J].
Durinck, Dirk ;
Engstroem, Fredrik ;
Arnout, Sander ;
Heulens, Jeroen ;
Jones, Peter Tom ;
Bjoerkman, Bo ;
Blanpain, Bart ;
Wollants, Patrick .
RESOURCES CONSERVATION AND RECYCLING, 2008, 52 (10) :1121-1131
[6]
HAASE B, 2009, P 1 INT SLAG VAL S L, P185
[7]
The volume stability of modern steelmaking slags [J].
Juckes, LM .
TRANSACTIONS OF THE INSTITUTION OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 2003, 112 (03) :C177-C197
[8]
Monaco A, 1996, STEEL PROC, V79, P701
[9]
Monaco A., 1994, P INT S RESOURCE CON, P107
[10]
Products of steel slags an opportunity to save natural resources [J].
Motz, H ;
Geiseler, J .
WASTE MANAGEMENT, 2001, 21 (03) :285-293