The influence of manufacturing parameters on the properties of macroporous Zirfon® separators

被引：58

作者：

Vermeiren, P. H. ^{[1
]}

Leysen, R. ^{[1
]}

Beckers, H. ^{[1
]}

Moreels, J. P. ^{[1
]}

Claes, A. ^{[1
]}

机构：

[1] Vlaamse Instelling Technol Onderzoek, Environm & Proc Technol, B-2400 Mol, Belgium

来源：

JOURNAL OF POROUS MATERIALS | 2008年 / 15卷 / 03期

关键词：

separator; Bubble-Point; ionic resistance; wettability; mechanical properties;

D O I：

10.1007/s10934-006-9084-0

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

The manufacturing of the macroporous Zirfon (R) separator is based on the film casting technique. This film casting technique allows different manufacturing steps to be varied in order to adapt both the composition and the structure of the separator to the specific requirements of the application. The Zirfon (R) separators can be used in alkaline electrochemical cells as a replacement of asbestos. At a temperature of 30 C the ionic resistance of the separator is as low as about 0.01 Omega Bubble-Point (BP) pressures as high as 1 MPa could be obtained.

引用

页码：259 / 264

页数：6

共 17 条

[1]

Bronoel G., 1993, EUR SPAC POW C GRAZ, P569

[2]

DOI S, 1991, DESALINATION, V80, P167, DOI 10.1016/0011-9164(91)85156-O

[3]

DOYEN W, 1990, Patent No. 0241995

[4]

GRIMSRUD L, 1997, HYP 2 C GRIMST NORW

[5]

Leysen R., 1990, INTRO SEPARATORS MEM, pR2773

[6]

Mulder M., 2012, BASIC PRINCIPLES MEM

[7] FORMATION OF ASYMMETRIC POLYSULFONE MEMBRANES BY IMMERSION PRECIPITATION .2. THE EFFECTS OF CASTING SOLUTION AND GELATION BATH COMPOSITIONS ON MEMBRANE-STRUCTURE AND SKIN FORMATION [J].

RADOVANOVIC, P ;

THIEL, SW ;

HWANG, ST .

JOURNAL OF MEMBRANE SCIENCE, 1992, 65 (03) :231-246

[8]

Tassin N., 1995, EUR SPAC POW C POIT, P595

[9] Zirfon(R): A new separator for Ni-H-2 batteries and alkaline fuel cells [J].

Vermeiren, P ;

Adriansens, W ;

Leysen, R .

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 1996, 21 (08) :679-684

[10]

Vermeiren P, 1998, HYDROGEN ENERGY PROGRESS XII, VOLS 1-3, P589

← 1 2 →