Improving the time resolution and signal noise ratio of ultrasonic testing of welds by the wavelet packet

In ultrasonic testing of welds, detection of small flaws is often difficult by the superimposed noise due to the grain structure of the material. The scattering of ultrasonic waves from grain boundaries can interfere and introduce disturbance in the received signal that can sometimes mask indications due to a small but potentially dangerous defect. However, to enhance the flaw characterization, methods based on 'thresholding' have given good results only when the signal to noise ratio is high, and since bandwidth of the reflected signal as well as its principal frequency is subject to wide variation, it is impossible to create an appropriate band pass filter. So linear filtering does not provide good results, because both, the structure noise and flaw signal concentrate energy in the same frequency band. Non-linear filtering can be used to reduce or suppress the noise from ultrasonic signals. One way out is to use the time frequency transforms, the method is based on the wavelet packet decomposition. The Debauchee function of order 8 [Daubauchee I. Orthogonal bases of capacity wavelets. Commun Pure Appl Math 1998;41] has been chosen as the analyzing function, and each measured ultrasonic signal is analyzed by a filter bank through only three levels of decomposition. This work demonstrates that the following analysis is very efficient with respect to signal recovery from noisy data. The experimental results have shown that the proposed method has excellent performances on SNR enhancements. © 2005 Elsevier Ltd. All rights reserved.