Proton exchange membranes based on sulfonated polyarylenethioethersulfone and sulfonated polybenzimidazole for fuel cell applications

被引:48
作者
Bai, Zongwu [1 ]
Price, Gary E.
Yoonessi, Mitra
Juhl, Shane B.
Durstock, Michael F.
Dang, Thuy D.
机构
[1] Univ Dayton, Res Inst, Dayton, OH 45469 USA
[2] MLBP, Air Force Res Lab, Wright Patterson AFB, OH 45433 USA
关键词
D O I
10.1016/j.memsci.2007.07.034
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Novel polymer composite membranes composed of sulfonated polyarylenethioether sulfone (SPTES) and sulfonated polybenzimidazole (SPBI) were prepared by solution casting with the composition of SPTES in the varied range from 30 to 70 wt%. The proton conductivity of the composite membranes was measured by four probe impedance spectroscopy at different temperatures. The highest proton conductivity (up to 100 mS/cm) was found for the SPTES/SPBI (70/30) polymer composite membrane at 85 degrees C, 85% relative humidity, and proton conductivity increased when the SPTES content increased. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and Atomic Force Microscopy (AFM) were used to confirm the presence of SPBI in the composite membranes as well as the dispersion of SPBI The results indicated that membranes showed a good perspective as proton exchange membrane (PEM) for fuel cell applications. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:69 / 76
页数:8
相关论文
共 16 条
[1]  
Aricò AS, 2001, FUEL CELLS, V1, P133
[2]   Direct synthesis of fully sulfonated polyarylenethioether sulfones as proton-conducting polymers for fuel cells [J].
Bai, Zongwu ;
Dang, Thuy D. .
MACROMOLECULAR RAPID COMMUNICATIONS, 2006, 27 (15) :1271-1277
[3]   Proton conductivity and properties of sulfonated polyarylenethioether sulfones as proton exchange membranes in fuel cells [J].
Bai, Zongwu ;
Durstock, Michael F. ;
Dang, Thuy D. .
JOURNAL OF MEMBRANE SCIENCE, 2006, 281 (1-2) :508-516
[4]  
Dang T. D., 2003, ACS PMSE PREPRINT, V89, P508
[5]   Synthesis and characterization of novel acid-base polymer blends for application in membrane fuel cells [J].
Kerres, J ;
Ullrich, A ;
Meier, F ;
Häring, T .
SOLID STATE IONICS, 1999, 125 (1-4) :243-249
[6]   Development of ionomer membranes for fuel cells [J].
Kerres, JA .
JOURNAL OF MEMBRANE SCIENCE, 2001, 185 (01) :3-27
[7]   Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications [J].
Kim, YS ;
Wang, F ;
Hickner, M ;
Zawodzinski, TA ;
McGrath, JE .
JOURNAL OF MEMBRANE SCIENCE, 2003, 212 (1-2) :263-282
[8]   Conductivity and water uptake of aromatic-based proton exchange membrane electrolytes [J].
Kopitzke, RW ;
Linkous, CA ;
Anderson, HR ;
Nelson, GL .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2000, 147 (05) :1677-1681
[9]   Comparative study of methanol crossover across electropolymerized and commercial proton exchange membrane electrolytes for the acid direct methanol fuel cell [J].
Kuver, A ;
Potje-Kamloth, K .
ELECTROCHIMICA ACTA, 1998, 43 (16-17) :2527-2535
[10]   Direct synthesis of sulfonated poly(ether ether ketone ketone)s (SPEEKKs) proton exchange membranes for fuel cell application [J].
Li, XF ;
Zhao, CJ ;
Lu, H ;
Wang, Z ;
Na, H .
POLYMER, 2005, 46 (15) :5820-5827