Health-monitoring method of note PC for cooling performance degradation and load assessment

Health monitoring technologies, which can evaluate the performance degradation, load history and degree of fatigue, have the potential to improve the effective maintenance, the reliability design method and the availability in the improper use conditions of electronic equipment. In this paper, we propose a method to assess the cooling performance degradation and load history of printed circuit boards in electronic equipment by use of a hierarchical Bayes model based on Computer Aided Engineering (CAE) results of thermal-stress simulation and experiment data from observed measurements. We applied this method to note PC that can monitor the device load factor and revolution number of cooling fan. It is shown that this method can estimate the temperature and deformation distribution of the printed circuit board from monitoring variables through latent variables such as thermal dissipation of the device and thermal boundary condition by use of the hierarchical Bayes model. And it is confirmed that the statistical load assessment concerning thermal cyclic load and the maximum load distribution can be conducted using the estimated temperature and deformation data. Furthermore, we verified that the cooling performance degradation can be assessed, if the temperature difference per unit thermal value between two suitable points on the printed circuit board can be obtained. It is concluded that the proposed method can be effective to assess the thermal load history and cooling performance degradation. (C) 2010 Elsevier Ltd. All rights reserved.