Influence of the Ti content, training cycles and pre-strain on the two-way shape memory effect in NiTi alloys

被引：26

作者：

Balak, Z. ^{[1
]}

Abbasi, S. M. ^{[2
]}

机构：

[1] Islamic Azad Univ, Fac Engn Branch, Dept Met & Mat Engn, Dezful, Iran

[2] KN Toosi Univ Technol, Adv Mat Res Lab, Tehran, Iran

来源：

MATERIALS & DESIGN | 2011年 / 32卷 / 07期

关键词：

TEMPERATURE; SPRINGS; BEHAVIOR;

D O I：

10.1016/j.matdes.2011.03.036

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this article, the effect of titanium content in the range of 49.9-50.8 at.%, number of training cycles and the amount of pre-strain on the two-way shape memory effect (TWSME) of TiNi shape memory alloy were investigated. So four ingots with compositions of Ni-49.9at%Ti, Ni-50.5at%Ti, Ni-50.7at%Ti and Ni-50.8at%Ti were prepared from technically pure metals by using vacuum induction melting. The transformation temperatures were obtained by DSC. The results showed that M-s temperature increases slithery with increasing in Ti content. Optimum number of training cycle and pre-strain were obtained, 10-15 cycles and 16% respectively. Also it was found that TWSME increases with decreasing in Ti content. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

引用

页码：3992 / 3996

页数：5

共 20 条

[1] Tribological behavior of NiTi alloy in martensitic and austenitic states [J].

Abedini, M. ;

Ghasemi, H. M. ;

Ahmadabadi, M. Nili .

MATERIALS & DESIGN, 2009, 30 (10) :4493-4497

[2] Influence of thermomechanical training deformations on TWSME in TiNiCu alloy spring [J].

Chen, L. P. ;

Si, N. C. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 448 (1-2) :219-222

[3] Influence of carbon on martensitic phase transformations in NiTi shape memory alloys [J].

Frenzel, J. ;

Zhang, Z. ;

Somsen, Ch. ;

Neuking, K. ;

Eggeler, G. .

ACTA MATERIALIA, 2007, 55 (04) :1331-1341

[4]

Leyou W, 2010, RARE METAL MAT ENG, V39, P762

[5] Two-way shape memory effect developed by martensite deformation in NiTi [J].

Liu, YN ;

Liu, Y ;

Van Humbeeck, J .

ACTA MATERIALIA, 1998, 47 (01) :199-209

[6] FACTORS INFLUENCING THE DEVELOPMENT OF 2-WAY SHAPE MEMORY IN NITI [J].

LIU, YO ;

MCCORMICK, PG .

ACTA METALLURGICA ET MATERIALIA, 1990, 38 (07) :1321-1326

[7] Two-way shape memory effect of a TiNiHf high temperature shape memory alloy [J].

Meng, XL ;

Zheng, YF ;

Cai, W ;

Zhao, LC .

JOURNAL OF ALLOYS AND COMPOUNDS, 2004, 372 (1-2) :180-186

[8] Hot tensile properties and microstructural evolution of as cast NiTi and NiTiCu shape memory alloys [J].

Morakabati, M. ;

Aboutalebi, M. ;

Kheirandish, Sh. ;

Taheri, A. Karimi ;

Abbasi, S. M. .

MATERIALS & DESIGN, 2011, 32 (01) :406-413

[9] Effect of cooling rate on the phase transformation behavior and mechanical properties of Ni-rich NiTi shape memory alloy [J].

Motemani, Y. ;

Nili-Ahmadabadi, M. ;

Tan, M. J. ;

Bornapour, M. ;

Rayagan, Sh. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 469 (1-2) :164-168

[10] Effect of mechanical cycling on the stress-strain response of a martensitic Nitinol shape memory alloy [J].

Nayan, Niraj ;

Buravalla, V. ;

Ramamurty, U. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 525 (1-2) :60-67

← 1 2 →