A soft-switched full-bridge single-stage AC-to-DC converter with low-line-current harmonic distortion

被引:42
作者
Bhat, AKS [1 ]
Venkatraman, R
机构
[1] Univ Victoria, Dept Elect & Comp Engn, Victoria, BC V8W 3P6, Canada
[2] Advance Transformer Co, Philips Lighting Elect, Rosemont, IL 60018 USA
基金
加拿大自然科学与工程研究理事会;
关键词
AC-to-dc converter; discontinuous current mode (DCM); full bridge; single stage; soft switching;
D O I
10.1109/TIE.2005.851639
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A single-phase high-frequency transformer-isolated soft-switching single-stage ac-to-do converter with low-line-current distortion is presented. The circuit configuration is obtained by integrating two discontinuous current mode (DCM) boost converters with a DCM full-bridge buck converter. The zero-voltage switching for the top switches is achieved automatically, whereas bottom switches are aided by zero-voltage transition circuits. The output voltage is regulated by duty-cycle control at constant switching frequency. The intervals of operation and steady-state analysis are presented. A systematic design procedure is presented with a 1-kW converter design example. PSPICE simulation and experimental results obtained from a 1-kW laboratory prototype are presented for a wide variation in line and load conditions.
引用
收藏
页码:1109 / 1116
页数:8
相关论文
共 9 条
  • [1] BHAT AKS, 1998, HIGH POWER FACTOR AC
  • [2] MODELING AND DESIGN OF A SINGLE-PHASE AC TO DC CONVERTER
    CHEN, TC
    PAN, CT
    [J]. IEE PROCEEDINGS-B ELECTRIC POWER APPLICATIONS, 1992, 139 (05): : 465 - 470
  • [3] HUA GC, 1992, IEEE POWER ELECTRON, P55, DOI 10.1109/PESC.1992.254691
  • [4] JOHNSTON MA, 1994, P IEEE APEC 94, P849
  • [5] LIU KH, 1989, PESC 89 RECORD, VOLS 1 AND 2, P825, DOI 10.1109/PESC.1989.48565
  • [6] REDL R, 1994, IEEE POWER ELECTRON, P1137, DOI 10.1109/PESC.1994.373825
  • [7] Redl R, 1996, IEEE POWER ELECTRON, P402, DOI 10.1109/PESC.1996.548611
  • [8] REDL R, 1992, P IEEE APPL POW EL C, P533
  • [9] VENKATRAMAN R, 1998, THESIS U VICTORIA VI