Effect of Microfiber Reinforcement on the Morphology, Electrical, and Mechanical Properties of the Polyethylene/Poly(ethylene terephthalate)/Carbon Nanotube Composites

被引：17

作者：

Yesil, Sertan ^{[1
]}

Koysuren, Ozcan ^{[1
]}

Bayram, Goknur ^{[1
]}

机构：

[1] Middle E Tech Univ, Dept Chem Engn, TR-06531 Ankara, Turkey

来源：

POLYMER ENGINEERING AND SCIENCE | 2010年 / 50卷 / 11期

关键词：

SLIT-DIE EXTRUSION; CONDUCTIVE POLYMER COMPOSITES; CARBON-BLACK; TENSILE PROPERTIES; BLENDS; CRYSTALLIZATION; POLY(ETHYLENE-TEREPHTHALATE); POLYCARBONATE; POLYETHYLENE; POLYAMIDE-6;

D O I：

10.1002/pen.21740

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In situ microfiber reinforced conductive polymer composites consisting of high-density polyethylene (HDPE), poly(ethylene terephthalate) (PET), and multiwalled carbon nanotube (CNT) were prepared in a twin screw extruder followed by hot stretching of PET/CNT phase in HDPE matrix. For comparison purposes, the HDPE/PET blends and HDPE/PET/CNT composites were also produced without hot stretching. Extrusion process parameters, hot-stretching speed, and CNT amount in the composites were kept constant during the experiments. Effects of PET content and molding temperature on the morphology, electrical, and mechanical properties of the composites were investigated. Morphological observations showed that PET/CNT microfibers were successfully formed in HDPE phase. Electrical conductivities of the microfibrillar composites were in semi-conductor range at 0.5 wt% CNT content. Microfiber reinforcement improved the tensile strength of the microfibrillar HDPE/PET/CNT composites in comparison to that of HDPE/PET blends and HDPE/PET/CNT composites prepared without hot stretching POLYM. ENG. SCI., 50:2093-2105, 2010. (C) 2010 Society of Plastics Engineers

引用

页码：2093 / 2105

页数：13

共 40 条

[1]

[Anonymous], 1989, POLYM HDB

[2] Effect of the dispersed phase fraction on particle size in blends with high viscosity ratio [J].

Cho, YG ;

Kamal, MR .

POLYMER ENGINEERING AND SCIENCE, 2002, 42 (10) :2005-2015

[3]

Ebbesen ThomasW., 1997, CARBON NANOTUBES PRE

[4]

Evstatiev M., 1995, Applied Composite Materials, V2, P93, DOI 10.1007/BF00569252

[5] Recycling of poly(ethylene terephthalate) as polymer-polymer composites [J].

Evstatiev, M ;

Fakirov, S ;

Krasteva, B ;

Friedrich, K ;

Covas, JA ;

Cunha, AM .

POLYMER ENGINEERING AND SCIENCE, 2002, 42 (04) :826-835

[6] In situ fibrillar reinforced PET/PA-6/PA-66 blend [J].

Evstatiev, M ;

Schultz, JM ;

Fakirov, S ;

Friedrich, K .

POLYMER ENGINEERING AND SCIENCE, 2001, 41 (02) :192-204

[7] Microfibrillar reinforced composites from PET/PP blends: processing, morphology and mechanical properties [J].

Friedrich, K ;

Evstatiev, M ;

Fakirov, S ;

Evstatiev, O ;

Ishii, M ;

Harrass, M .

COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (01) :107-116

[8]

Friedrich K., 2004, INT J POLYM MATER, V53, P211

[9] Microfibril reinforced polymer-polymer composites: Application of Tsai-Hill equation to PP/PET composites [J].

Fuchs, C. ;

Bhattacharyya, D. ;

Fakirov, S. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (16) :3161-3171

[10] A promising conductive material: highly oriented polypropylene. filled with short vapour-grown carbon fibres [J].

Gordeyev, SA ;

Ferreira, JA ;

Bernardo, CA ;

Ward, LM .

MATERIALS LETTERS, 2001, 51 (01) :32-36

← 1 2 3 4 →