Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering

被引：145

作者：

Drummer, Dietmar ^{[1
]}

Rietzel, Dominik ^{[1
]}

Kuehnlein, Florian ^{[1
]}

机构：

[1] Inst Polymer Technol LKT, D-91058 Erlangen, Germany

来源：

LASER ASSISTED NET SHAPE ENGINEERING 6, PROCEEDINGS OF THE LANE 2010, PART 2 | 2010年 / 5卷

关键词：

Selective Laser Sintering; Additive Manufacturing; Isothermal Crystallization; POM; PP; PA2200; PE; PEEK HP-3;

D O I：

10.1016/j.phpro.2010.08.081

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Currently the standard thermoplastic powders for selective laser sintering are based on polyamide12. This leads to restrictions for many applications e. g. in the industrial or medical field. Thus, research on further polymers with enhanced chemical or higher thermal stability plays a major role for applying additive manufacturing to serial production of individual components. Currently, great efforts are made to process new technical thermoplastics like polypropylene or polyetherketones by selective laser sintering. In this paper, the suitability and processing behavior by means of melting and ( isothermal) crystallization are studied, and a method for the qualification of new materials is presented. Based on this method processing parameters for new thermoplastics can systematically be found. (C) 2010 Published by Elsevier B.V.

引用

页码：533 / 542

页数：10

共 18 条

[1]

Alscher: G., 2000, Das Verhalten teilkristalliner Thermoplaste beim Lasersintern

[2]

*ASTM, 2008, STAND TEST METH KIN

[3]

Ehrenstein G. W., 1999, POLYMERWERKSTOFFE

[4]

estk J., 1971, Thermochim. Acta, V3, P1, DOI [10.1016/0040-6031(71)85051-7, DOI 10.1016/0040-6031(71)85051-7, 10. 1016/0040-6031(71)85051-7]

[5]

EYERER P, 1993, KUNSTST-GER PLAST+, V83, P949

[6] Morphology and properties of selective laser sintered bisphenol A polycarbonate [J].

Ho, HCH ;

Cheung, WL ;

Gibson, I .

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2003, 42 (09) :1850-1862

[7] Consolidation phenomena in laser and powder-bed based layered manufacturing [J].

Kruth, J. -P. ;

Levy, G. ;

Klocke, F. ;

Childs, T. H. C. .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (02) :730-759

[8]

Kruth J.-P., 2008, 3 INT C PMI2008, P1

[9]

KUHNLEIN F, 2008, PLASTVERARBEITER, V8, P70

[10]

MARK C, 2004, SINTERING USING THER, P10

← 1 2 →