Treatment of toluene in an air stream by a biotrickling filter packed with slags

This study utilized a biotrickling filter with blast-furnace slag packings (sizes = 20-40 mm; specific surface area = 120 m(2)/m(3)) to treat toluene in an air stream. Also studied were the effects of volumetric loading (L), nutrient addition, and superficial gas velocity (U-0) or gas retention time on toluene elimination capacity. Experimental results indicate that, for a test period of 121 days, with Ilo excess biomass removal, toluene removal efficiencies of over 90% were obtained with U-0 < 80 m/hr and L < 30 g/m(3).hr. For a test period of 49 days, with U-0 < 80 m/hr and L increased from 1.2 to 81 g/m(3).hr, the absence of nutrient supplementation did not limit the toluene elimination capacity. Nutrients stored in the biofilm could adequately support the microbial activity for the toluene elimination. According to data regression, a simplified mass-transfer model is proposed, which correlates the contaminant concentration with the packing height or gas empty bed retention time. As verified, the model proposed herein can be applied to cases involving low influent contaminant concentrations or loadings to the extent that none or only a trace amount of the contaminant can be found in the recirculation liquid. Although small media with larger specific surface areas can achieve a better mass transfer, the problems of frequent backwashing and relatively greater gas resistance in using this type of media probably outweigh the advantages, particularly for full-scale systems that would not be watched as closely as laboratory test systems.