Optimization of plasma arc welding parameters by using the Taguchi method with the grey relational analysis

被引：121

作者：

Hsiao, Y. F. ^{[1
]}

Tarng, Y. S. ^{[1
]}

Huang, W. J. ^{[1
]}

机构：

[1] Natl Taiwan Univ Sci & Technol, Dept Mech Engn, Taipei, Taiwan

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2008年 / 23卷 / 01期

关键词：

analysis of variance ( ANOVA); dyeing machinery; grey relational analysis; keyhole; multiple performance; optimization; orthogonal array; penetration; plasma arc welding ( PAW); S/N ratio; Taguchi method; torch stand-off; undercut; welding current;

D O I：

10.1080/10426910701524527

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The optimal parameters process of plasma arc welding (PAW) by the Taguchi method with Grey relational analysis is studied. The Grey relational grade is used to find optimal PAW parameters with multiple response performance characteristics. The welding parameters (welding current, welding speed, plasma gas flow rate, and torch stand-off) are optimized with consideration of the multiple response performance characteristics (the penetration of root, the weld groove width, and the weld pool undercut). As a result, the improvement percentage of the Grey relational grade with the multiple performance characteristics is 31.8%. It is shown that the multiple response performance characteristics are greatly improved through this study.

引用

页码：51 / 58

页数：8

共 13 条

[1]

Deng Julong, 1989, Journal of Grey Systems, V1, P1

[2]

Fisher R. A., 1925, STAT METHODS RES WOR

[3] Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis [J].

Fung, CP .

WEAR, 2003, 254 (3-4) :298-306

[4]

Howard B. C., 1989, MODERN WELDING TECHN

[5] Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses [J].

Huang, JT ;

Liao, YS .

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 2003, 41 (08) :1707-1720

[6] Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel [J].

Juang, SC ;

Tarng, YS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 122 (01) :33-37

[7] Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics [J].

Lin, CL .

MATERIALS AND MANUFACTURING PROCESSES, 2004, 19 (02) :209-220

[8] Optimising removal rate and reliability of polishing of ceramic blocks using a combination of Taguchi and grey methods [J].

Lin, TR ;

Chiu, HC ;

Huang, MF .

MATERIALS SCIENCE AND TECHNOLOGY, 2004, 20 (12) :1649-1654

[9] Probe radius compensated by the multi-cross product method in freeform surface measurement with touch trigger probe CMM [J].

Lin, YC ;

Sun, WI .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 21 (10-11) :902-909

[10]

*LINC EL CO, 1973, PROC HDB ARC WELD

← 1 2 →