Effect of system nonlinearities on locomotive bogie hunting stability

This paper presents the effect of system parameters on hunting of a rail vehicle with nonlinear yaw dampers and wheel-rail interface. This study is intended to complement earlier studies by True et al. where they investigated the effect of nonlinearities stemming from creep-creep force saturation and wheel/rail contact forces. The rail vehicle is represented by a two-axle truck (bogie) that includes the dynamics of the wheelsets and the truck frame. The numerical simulation results show that yaw damping can have a mixed effect on the hunting critical speed. In some ranges, increasing damping can actually lower the critical speed, unlike the results commonly obtained from a linear model. Flange contact nonlinearities can also have a significant effect on the hunting behavior. Large lateral stiffness of the rail can increase lateral force to vertical force (L/V) ratio during hunting. increasing the gauge clearance, however, can have an opposite effect. The effect of a variety of other parameters, such as the primary suspension yaw and lateral stiffness, primary suspension lateral damping, wheelset mass, and truck frame mass, are summarized in a table.