Manufacturing and applications of structural sandwich components

被引:203
作者
Karlsson, KF [1 ]
Astrom, BT [1 ]
机构
[1] ROYAL INST TECHNOL, DEPT AERONAUT STRUCT, S-10044 STOCKHOLM, SWEDEN
关键词
sandwich components; manufacture; hand lay-up; resin transfer moulding (RTM); continuous processes; compression moulding; filament winding; materials; applications;
D O I
10.1016/S1359-835X(96)00098-X
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Techniques to manufacture sandwich components for structural applications are summarized and discussed in terms of processing steps, characteristics of both technique and manufactured components, and application examples. The emphasis is on the commercially most common manufacturing techniques, though less common processing routes are briefly discussed as well. The intentions of this review are twofold: first, the paper aims to provide a means of comparing available manufacturing techniques in terms of feasibility for a specific application; second, the paper aims to provide a baseline for further research and development efforts in the field of sandwich manufacture. A discussion of recent developments and future trends in terms of both materials and processing routes rounds up the paper. Copyright (C) 1996 Elsevier Science Limited.
引用
收藏
页码:97 / 111
页数:15
相关论文
共 71 条
[1]  
ADVANI SG, 1994, COMPOS MATER SERIES, V10, P465
[2]  
ANDEREGG K, 1994, SCHWEIZER EISENBAHN, P539
[3]  
ANDEREGG K, 1995, SCHWEIZER EISENBAHN, P71
[4]  
BADER MG, 1990, PROCESSING FABRICATI, V3, P105
[5]  
BELGRANO G, ADV LAMINATED COMPOS
[6]  
BEUKERS A, 1991, MATER SCI MONOG, V72, P393
[7]  
Beukers A, 1992, ADV MAT STRUCT RES A, P427
[8]  
BRAMBACH JA, 1991, Patent No. 5043127
[9]  
BROOKS N, 1995, REINF PLAST, V39, P26
[10]  
BROOKS N, 1995, REINF PLAST, V39, P20