Input current shaper based on the series connection of a voltage source and a loss-free resistor

被引:31
作者
Sebastián, J [1 ]
Hernando, MM [1 ]
Fernández, A [1 ]
Villegas, PJ [1 ]
Díaz, J [1 ]
机构
[1] Univ Oviedo, Dept Ingn Elect Elect Computadores & Sistemas, Gijon 33204, Spain
关键词
IEC; 1000-3-2; specifications; power-factor correction; power supplies;
D O I
10.1109/28.913725
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new input current shaper is proposed in this paper. The operating principle is based on the connection of a voltage source and a loss-free resistor (LFR) between the input rectifier and the bulk capacitor in a conventional switching-mode power supply with no power-factor correction. Both the voltage source and the LFR are obtained as an additional output from the converter's transformer. This additional output is a forward-type one with one extra inductor, With the final topology, a good tradeoff between capacitor voltage, recycling energy, and harmonic content can be established in order to comply with IEC 1000-3-2 specifications.
引用
收藏
页码:583 / 591
页数:9
相关论文
共 16 条
[1]  
Daniele M, 1996, IEEE POWER ELECTRON, P216, DOI 10.1109/PESC.1996.548584
[2]  
Dixon L., 1988, P UN POW SUPPL DES S, P51
[3]  
Huber L, 1997, IEEE POWER ELECTRON, P519, DOI 10.1109/PESC.1997.616772
[4]  
HUBER L, 1997, P IEEE APEC 97, P272
[5]  
JIANG Y, 1993, P IEEE APEC 93, P287
[6]  
JIANG YM, 1994, IEEE POWER ELECTRON, P1145, DOI 10.1109/PESC.1994.373826
[7]   Merits and limitations of full-bridge rectifier with LC filter in meeting IEC 1000-3-2 harmonic-limit specifications [J].
Jovanovic, MM ;
Crow, DE .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1997, 33 (02) :551-557
[8]  
KHERALUWALA MH, 1991, PESC 91 RECORD, P769, DOI 10.1109/PESC.1991.162763
[9]   AN AC-TO-DC CONVERTER WITH HIGH-QUALITY INPUT WAVEFORMS [J].
KOCHER, MJ ;
STEIGERWALD, RL .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1983, 19 (04) :586-599
[10]  
MADIGAN M, 1992, IEEE POWER ELECTRON, P1043, DOI 10.1109/PESC.1992.254769