Understanding high critical currents in YBa2Cu3O7 thin films and coated conductors

The main challenges for the success of high temperature superconducting wires, the YBa(2)Cu(3)O(7) (YBCO) coated conductors (CC), are to avoid the the weak-link problem through the production of biaxially textured films, and to increase the critical current density (J(c)) through the introduction of large densities of appropriate defects. To that end, it is essential to understand the pinning mechanisms and their correlation with the microstructure of the CC. We first present a brief overview of the main methods currently used to produce YBCO CC, and we describe the architecture of the YBCO on IBAD fabricated at Los Alamos, summarizing the recent improvements of their structural and superconducting properties. Then, we analyze some aspects of the J(c) dependence on temperature and magnetic field (orientation and intensity) for the best CC available, and we compare and contrast the results with those of YBCO thin films on single crystal substrates, in order to determine if the defects controlling the pinning mechanisms are the same in both cases. Our results indicate that over large field and angular ranges J(c) on CC is higher than J(c) in thin films on SCS.