Changes in curing behaviour of aminoresins during storage

被引:37
作者
Siimer, K
Kaljuvee, T
Christjanson, P
Pehk, T
机构
[1] Tallinn Univ Technol, EE-19086 Tallinn, Estonia
[2] NICPB, EE-12618 Tallinn, Estonia
关键词
C-13; NMR; curing; melamine-urea-formaldehyde resins; polycondensation; storage; TG-DTA technique; urea-formaldehyde resins; UREA-FORMALDEHYDE RESINS; C-13-NMR SPECTROSCOPY; STRUCTURAL-CHANGES; PARAMETERS; POLYCONDENSATION;
D O I
10.1007/s10973-005-0623-8
中图分类号
O414.1 [热力学];
学科分类号
摘要
The curing behaviour of commercial UF and MUF resins, stored at room temperature nearly up to gelation, is studied by simultaneous TG-DTA technique and structural changes of resins are also followed during aging. On the basis of C-13 NMR spectra, the main chemical reaction during UF resin storage is the formation of methylenes and dimethylene ethers linked to secondary amino groups. Aging of resins results in a decrease of cure rate which is related to lower concentration of active functional groups and decrease in molecular mobility. On DTA curve, the resin with higher content of methylol groups reveals the curing exotherm earlier. With decreasing methylol content during storage, the peak maximum of exotherm is shifted to higher temperature value. Advanced polycondensation and sedimentation processes during storage produce partly locked in macromolecule structure water, and the water evaporation endotherm on DTA curve shifts to considerably higher temperature. The aged MUF resins are chemically less changed than UF resins and the aging process mainly involves non-covalent network formation due to complex molecular structure.
引用
收藏
页码:123 / 130
页数:8
相关论文
共 18 条
[1]   Structural changes in urea-formaldehyde resins during storage [J].
Christjanson, P ;
Siimer, K ;
Pehk, T ;
Lasn, I .
HOLZ ALS ROH-UND WERKSTOFF, 2002, 60 (06) :379-384
[2]  
Coullerez G, 2000, SURF INTERFACE ANAL, V29, P431, DOI 10.1002/1096-9918(200007)29:7<431::AID-SIA886>3.3.CO
[3]  
2-T
[4]  
Jahromi S, 1999, J POLYM SCI POL PHYS, V37, P3307, DOI 10.1002/(SICI)1099-0488(19991201)37:23<3307::AID-POLB6>3.0.CO
[5]  
2-#
[6]  
KENDALL EW, 2000 TAPPI PLAST LUM, P117
[7]   Examination of selected synthesis and room-temperature storage parameters for wood adhesive-type urea-formaldehyde resins by 13C-NMR spectroscopy.: V [J].
Kim, MG ;
No, BY ;
Lee, SM ;
Nieh, WL .
JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (07) :1896-1917
[8]   Examination of selected synthesis and room-temperature storage parameters for wood adhesive-type urea-formaldehyde resins by 13C-NMR spectroscopy.: IV [J].
Kim, MG ;
Wan, H ;
No, BY ;
Nieh, WL .
JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (05) :1155-1169
[9]  
MALKIN AY, 1991, ADV POLYM SCI, V101, P217
[10]  
MBACHU RAD, 2002, P 25 ANN M ADH SOC F, P209