The microstructures of polycrystalline Al-0.1 Mg after hot plane strain compression

被引:40
作者
Humphreys, F. J. [1 ]
Bate, P. S. [1 ]
机构
[1] Univ Manchester, Ctr Mat Sci, Manchester M1 7HS, Lancs, England
基金
英国工程与自然科学研究理事会;
关键词
high temperature deformation; EBSD; substructure; aluminium; polycrystals;
D O I
10.1016/j.actamat.2007.06.032
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The microstructures of Al-0.1 Mg polycrystals deformed in plane strain compression at temperatures of 20-400 degrees C have been investigated by electron backscatter diffraction. At all temperatures, the microstructures are characterized by two types of banded substructure, primary bands of aligned low angle boundaries whose alignment to the rolling plane is a function of strain and temperature, and secondary bands which develop into grain-scale shear bands with increasing strain. Several aspects of the deformation micro structures, including the orientation dependence of subgrain parameters and the inhomogeneity of the microstructure, differ from those of single crystals of similar orientation, and this it attributed to local grain interactions. (c) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:5630 / 5645
页数:16
相关论文
共 40 条
[1]  
[Anonymous], THERMOMECHANICAL PRO
[2]  
[Anonymous], P 6 INT AL C ICAA6
[3]  
[Anonymous], RECRYSTALLIZATION 92
[4]  
[Anonymous], HOT DEFORMATION ALUM
[5]   The characterization of low-angle boundaries by EBSD [J].
Bate, PS ;
Knutsen, RD ;
Brough, I ;
Humphreys, FJ .
JOURNAL OF MICROSCOPY, 2005, 220 :36-46
[6]   Texture development in the cold rolling of IF steel [J].
Bate, PS ;
da Fonseca, JQ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 380 (1-2) :365-377
[7]   The influence of transient strain-rate deformation conditions on the deformed microstructure of aluminium alloy Al-1% Mg [J].
Baxter, GJ ;
Furu, T ;
Zhu, Q ;
Whiteman, JA ;
Sellars, CM .
ACTA MATERIALIA, 1999, 47 (08) :2367-2376
[8]   MICROSTRUCTURAL EVOLUTION IN ROLLED ALUMINUM [J].
BAY, B ;
HANSEN, N ;
KUHLMANNWILSDORF, D .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 158 (02) :139-146
[9]   Characteristics of the equiaxed cell block structure formed within cube-textured grains during tensile deformation of aluminium [J].
Cizek, P .
SCRIPTA MATERIALIA, 2001, 45 (07) :815-822
[10]  
Daaland O, 1996, ACTA MATER, V44, P1389, DOI 10.1016/1359-6454(95)00289-8