A study of the surface deformation behaviour at grain boundaries in an ultra-low-carbon steel

被引：40

作者：

Chandrasekaran, D ^{[1
]}

Nygårds, M

机构：

[1] Royal Inst Technol, Dept Mat Sci & Engn, SE-10044 Stockholm, Sweden

[2] Royal Inst Technol, Dept Solid Mech, S-10044 Stockholm, Sweden

来源：

ACTA MATERIALIA | 2003年 / 51卷 / 18期

关键词：

atomic force microscopy; EBSD; IF steels;

D O I：

10.1016/S1359-6454(03)00394-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tensile specimens of ultra-low-carbon ferritic steel with two different grain sizes were studied by atomic force microscopy (AFM) and electron backscatter diffraction (EBSD) after different plastic strains up to 10%. Different parameters, such as the change in surface roughness and the change in misorientation with strain, were evaluated. There was good agreement between the AFM and EBSD results. Both the surface roughness and the misorientation measurements on the surface showed a linear increase with the overall strain, an obvious consequence being that both AFM and EBSD are suitable for characterising the surface deformation behaviour. The results are discussed with respect to the difference in grain size in the samples and the implication on the strain hardening behaviour. (C) 2003 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：5375 / 5384

页数：10

共 20 条

[1] DEFORMATION OF PLASTICALLY NON-HOMOGENEOUS MATERIALS [J].

ASHBY, MF .

PHILOSOPHICAL MAGAZINE, 1970, 21 (170) :399-&

[2] Orientation imaging microscopic observations of in situ deformed ultra low carbon steel [J].

Balke, P ;

De Hosson, JTM .

SCRIPTA MATERIALIA, 2001, 44 (03) :461-466

[3] Incompatibility and a simple gradient theory of plasticity [J].

Bassani, JL .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2001, 49 (09) :1983-1996

[4] Structure and development of slip lines during plastic deformation of the intermetallic phases Fe3Al and CuZn [J].

Brinck, A ;

Engelke, C ;

Kopmann, W ;

Neuhauser, H .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 :180-187

[5]

CHANDRASEKARAN D, UNPUB MAT SCI ENG

[6] AFM characterization of the evolution of surface deformation during fatigue in polycrystalline copper [J].

Cretegny, L ;

Saxena, A .

ACTA MATERIALIA, 2001, 49 (18) :3755-3765

[7]

FUKOKA C, 2002, SCRIPTA MATER, V46, P61

[8] ATOMIC-FORCE MICROSCOPY AND MODELING OF FATIGUE-CRACK INITIATION IN METALS [J].

HARVEY, SE ;

MARSH, PG ;

GERBERICH, WW .

ACTA METALLURGICA ET MATERIALIA, 1994, 42 (10) :3493-3502

[9] Review - Grain and subgrain characterisation by electron backscatter diffraction [J].

Humphreys, FJ .

JOURNAL OF MATERIALS SCIENCE, 2001, 36 (16) :3833-3854

[10] Mechanisms and modelling of microstructure/texture evolution in interstitial-free steel sheets [J].

Hutchinson, B ;

Artymowicz, D .

ISIJ INTERNATIONAL, 2001, 41 (06) :533-541

← 1 2 →