Fretting wear of multilayered (Ti,Al)N/TiN coatings in air of different relative humidity

被引：54

作者：

Huq, MZ ^{[1
]}

Celis, JP ^{[1
]}

机构：

[1] Katholieke Univ Leuven, Dept Met & Mat Engn, B-3001 Louvain, Belgium

来源：

WEAR | 1999年 / 225卷

关键词：

ceramic coatings; nanohardness; tribology; dissipated energy; relative humidity;

D O I：

10.1016/S0043-1648(98)00348-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Physical vapour deposited multilayered (Ti,Al)N/TiN coatings of different sublayer thicknesses were investigated and compared with monolayered (TI,AI)N and TiN coatings. Mechanical characterisation was done using a depth sensing nanoindenter. Hardness and elastic modulus of multilayered coatings are higher than those of monolayer (Ti,AI)N coatings and sometimes comparable to TiN coatings. The mechanical properties of multilayered coatings depend upon the ratio of the thickness of (Ti,Al)N and TiN sublayers. Friction and wear were investigated in unlubricated fretting tests performed in air of different relative humidity. Multilayered (Ti,Al)N/TiN coatings show an improved fretting wear resistance compared to monolayer (Ti,Al)N coatings and at some fretting conditions the wear is comparable to TiN coatings or even better. A linear relationship between wear volume and dissipated energy was noticed for (TI,AI)N and multilayered (Ti,AI)N/TiN coatings, but a large dependency upon the relative humidity was observed in contrast to TiN coatings. An explanation is put forward based on an evolving tribochemical interaction between the debris formation and the surrounding atmosphere. (C) 1999 Elsevier Science S.A. All rights reserved.

引用

页码：53 / 64

页数：12

共 34 条

[1]

AJAYI OO, 1989, INT C WEAR MAT ASME, P349

[2] CONTACT AND RUBBING OF FLAT SURFACES [J].

ARCHARD, JF .

JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) :981-988

[3] HARD COATINGS OF TIN, (TIHF)N AND (TINB)N DEPOSITED BY RANDOM AND STEERED ARC EVAPORATION [J].

BOELENS, S ;

VELTROP, H .

SURFACE & COATINGS TECHNOLOGY, 1987, 33 (1-4) :63-71

[4]

BROMARK M, 1992, TRIBOLOGIA, V11, P153

[5]

CELIS JP, 1988, SURFACE MODIFICATION, V11, P860

[6] CRACKING AND STRESS REDISTRIBUTION IN CERAMIC LAYERED COMPOSITES [J].

CHAN, KS ;

HE, MY ;

HUTCHINSON, JW .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 167 (1-2) :57-64

[7]

GARDOS MN, 1989, MATER RES SOC S P, V140, P325

[8] TRIBOCHEMICAL MECHANISM OF ALUMINA WITH WATER [J].

GATES, RS ;

HSU, SM ;

KLAUS, EE .

TRIBOLOGY TRANSACTIONS, 1989, 32 (03) :357-363

[9] THE FORMATION OF ALUMINUM HYDROXIDE IN THE SLIDING WEAR OF ALUMINA [J].

GEE, MG .

WEAR, 1992, 153 (01) :201-227

[10]

GUNNARS J, 1995, THESIS UPPSALA U

← 1 2 3 4 →