Solids flow characteristics in loop-seal of a circulating fluidized bed

被引:61
作者
Kim, SW [1 ]
Namkung, W [1 ]
Kim, SD [1 ]
机构
[1] Korea Adv Inst Sci & Technol, Dept Chem Engn, Taejon 305701, South Korea
关键词
circulating fluidized bed; solid recycle system; loop-seal; non-mechanical valve; downcomer;
D O I
10.1007/BF02699009
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The hydrodynamics of solids (FCC) recycle in a loop-seal (0.08 m) at the bottom of the downcomer (0.08 m-I.D. x 4.0 m-high) in a circulating fluidized bed (0.1 m-I.D. x 5.3 m-high) have been determined. Solid now rate through the loop-seal increases linearly with increasing aeration rate. At the same aeration rate, the maximum solid now rate can be obtained at a loop-seal height-to-diameter ratio of 2.5. The effects of solid inventory, solid circulation rate and gas velocity on pressure balance around the CFB have been determined. At a given gas velocity and solid circulation rate, pressure drops across the downcomer and loop-seal increase Linearly with increasing solids inventory in the bed. At a constant solid inventory, pressure drops across the riser and the downcomer increase with increasing solid circulation rate but decrease with increasing gas velocity in the riser. The obtained solid now rate has been correlated with pressure drop across the loop-seal.
引用
收藏
页码:82 / 88
页数:7
相关论文
共 16 条
[1]  
Basu P., 1991, CIRCULATING FLUIDIZE, DOI 10.1016/C2009-0-26182-4
[2]   EFFECT OF SECONDARY AIR INJECTION ON AXIAL SOLID HOLDUP DISTRIBUTION IN A CIRCULATING FLUIDIZED-BED [J].
CHO, YJ ;
NAMKUNG, W ;
KIM, SD ;
PARK, SW .
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1994, 27 (02) :158-164
[3]  
DRIES HWA, 1980, FLUIDIZATION, P493
[4]  
ERGUN S, 1952, CHEM ENG PROG, V48, P89
[5]  
KNOWLTON TM, 1978, HYDROCARB PROCESS, V57, P149
[6]  
KNOWLTON TM, 1988, CFB TECHNOL, V3, P31
[7]  
KNOWLTON TM, 1978, EFFECT AERATION TAP, P128
[8]  
KOJABASHIAN C, 1958, THESIS MIT CAMBRIDGE
[9]   OPERATION OF V-VALVES FOR GAS SOLID FLOW [J].
LEUNG, LS ;
CHONG, YO ;
LOTTES, J .
POWDER TECHNOLOGY, 1987, 49 (03) :271-276
[10]  
MERROW E, 1985, CHEM ENG PROCESS MAY, P14