Disposable Smart lab on a chip for point-of-care clinical diagnostics

被引:379
作者
Ahn, CH [1 ]
Choi, JW
Beaucage, G
Nevin, JH
Lee, JB
Puntambekar, A
Lee, JY
机构
[1] Univ Cincinnati, Cincinnati, OH 45221 USA
[2] Louisiana State Univ, Baton Rouge, LA 70801 USA
[3] Univ Texas, Richardson, TX 75083 USA
[4] Ohio State Univ, Columbus, OH 45221 USA
关键词
biosensor array; clinical diagnostics; lab on a chip; on-chip power source; smart passive microfluidics;
D O I
10.1109/JPROC.2003.820548
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper presents the development of a disposable plastic biochip incorporating smart passive microfluidics with embedded on-chip power sources and integrated biosensor array for applications in clinical diagnostics and point-of-care testing. The fully integrated disposable biochip is capable of precise volume control with smart microfluidic manipulation without costly on-chip microfluidic components. The biochip has a unique power source using on-chip pressurized air reservoirs, for microfluidic manipulation, avoiding the need for complex microfluidic pumps. In addition, the disposable plastic biochip has successfully been tested for the measurements of partial oxygen concentration, glucose, and lactate level in human blood using an integrated biosensor array. This paper presents details of the smart passive microfluidic system, the on-chip power source, and the biosensor array together with a detailed discussion of the plastic micromachining techniques used. for chip fabrication. A handheld analyzer capable of multiparameter detection of clinically relevant parameters has also been developed to detect the signals from the cartridge type disposable biochip. The handheld analyzer developed in this work is currently the smallest analyzer capable of multiparameter detection for point-of-care testing.
引用
收藏
页码:154 / 173
页数:20
相关论文
共 75 条
  • [1] AHN C, P MU TAS 2000, P205
  • [2] AHN CH, P MU TAS 98 WORKSH, P225
  • [3] Microfluidic devices for μ-TAS applications fabricated by polymer hot embossing
    Becker, H
    Dietz, W
    [J]. MICROFLUIDIC DEVICES AND SYSTEMS, 1998, 3515 : 177 - 182
  • [4] Becker H, 2000, ELECTROPHORESIS, V21, P12, DOI 10.1002/(SICI)1522-2683(20000101)21:1<12::AID-ELPS12>3.3.CO
  • [5] 2-Z
  • [6] Polymer microfluidic devices
    Becker, H
    Locascio, LE
    [J]. TALANTA, 2002, 56 (02) : 267 - 287
  • [7] Beebe D J, 2001, MEC IND, V2, P343
  • [8] A micromachined surface work-function gas sensor for low-pressure oxygen detection
    Bergstrom, PL
    Patel, SV
    Schwank, JW
    Wise, KD
    [J]. SENSORS AND ACTUATORS B-CHEMICAL, 1997, 42 (03) : 195 - 204
  • [9] BOHM S, 2001, UTAS 01 MONT CA
  • [10] A planar microfabricated fluid
    Brody, JP
    Osborn, TD
    Forster, FK
    Yager, P
    [J]. SENSORS AND ACTUATORS A-PHYSICAL, 1996, 54 (1-3) : 704 - 708