Temperature estimation in inverter-fed machines using high-frequency carrier signal injection

被引:52
作者
Briz, Fernando [1 ]
Degner, Michael W. [2 ]
Guerrero, Juan M. [1 ]
Diez, Alberto B. [1 ]
机构
[1] Univ Oviedo, Dept Elect Comp & Syst Engn, Gijon 33204, Spain
[2] Ford Motor Co, Res & Adv Engn, Dearborn, MI 48121 USA
关键词
carrier signal injection; temperature estimation; temperature monitoring; thermal protection;
D O I
10.1109/TIA.2008.921380
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Temperature monitoring using the injection of a high-frequency carrier signal voltage is proposed in this paper. The carrier signal voltage is,used to estimate the transient impedance of the system, which is a function of the stator transient resistance and, therefore, the windings' temperature. The variation of the stator transient impedance's phase angle is used to track the temperature of the stator windings. The method can be implemented in standard inverter-fed drives with no additional hardware, with minimal computational requirements, and with practically no interference with the regular operation of the drive.
引用
收藏
页码:799 / 808
页数:10
相关论文
共 15 条
[1]   Induction motors thermal monitoring by means of rotor resistance identification [J].
Beguenane, R ;
Benbouzid, MEH .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (03) :566-570
[2]   CAUSE AND ANALYSIS OF STATOR AND ROTOR FAILURES IN 3-PHASE SQUIRREL-CAGE INDUCTION-MOTORS [J].
BONNETT, AH ;
SOUKUP, GC .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1992, 28 (04) :921-937
[3]   Quasi-fuzzy estimation of stator resistance of induction motor [J].
Bose, BK ;
Patel, NR .
IEEE TRANSACTIONS ON POWER ELECTRONICS, 1998, 13 (03) :401-409
[4]   Dynamic operation of carrier-signal-injection-based sensorless direct field-oriented AC drives [J].
Briz, F ;
Diez, A ;
Degner, MW .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (05) :1360-1368
[5]  
GAO Z, 2005, P IEEE INT C EL MACH, P754
[6]   TRANSDUCERLESS POSITION AND VELOCITY ESTIMATION IN INDUCTION AND SALIENT AC MACHINES [J].
JANSEN, PL ;
LORENZ, RD .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (02) :240-247
[7]   Rotor temperature estimation of squirrel-cage induction motors by means of a combined scheme of parameter estimation and a thermal equivalent model [J].
Kral, C ;
Habetler, TG ;
Harley, RG ;
Pirker, F ;
Pascoli, G ;
Oberguggenberger, H ;
Fenz, CJM .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2004, 40 (04) :1049-1057
[8]   An evaluation of model-based stator resistance estimation for induction motor stator winding temperature monitoring [J].
Lee, SB ;
Habetler, TG ;
Harley, RG ;
Gritter, DJ .
IEEE TRANSACTIONS ON ENERGY CONVERSION, 2002, 17 (01) :7-15
[9]   An online stator winding resistance estimation technique for temperature monitoring of line-connected induction machines [J].
Lee, SB ;
Habetler, TG .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2003, 39 (03) :685-694
[10]  
Lee SB, 2000, IEEE IND APPLIC SOC, P381, DOI 10.1109/IAS.2000.881139