Inorganic macroporous films from preformed nanoparticles and membrane templates: Synthesis and investigation of photocatalytic and photoelectrochemical properties

Colloidal dispersions of titania, zirconia, tin oxide, and ceria have been successfully used to impregnate membrane templates and form the respective metal oxide (MO) porous films. The use of alumina and iron oxide sols in the same procedure, however, resulted in compact structures. By mixing different nanoparticle solutions before impregnation, final inorganic films containing two metal oxides, of variable metal oxide ratios, were obtained. The porous inorganic materials were analyzed in terms of surface area, pore size, film thickness, and crystallinity. The mechanism of nanoparticle infiltration and particle adsorption to the template walls is proposed based on the stability of the inorganic film and a study of the influence of either the sol concentration or washing times on the amount of inorganic substance incorporated in the hybrid material. The photocatalytic decomposition of an organic pollutant, 2-chlorophenol, was demonstrated for the porous titania material along with the structures containing mixtures of titania with zirconia, indium oxide and tin oxide. A ratio of 9:1 TiO2/MO gave the highest photocatalytic activity, which was higher than the activity of Degussa P25 for the TiO2/In2O3 and TiO2/SnO2 system under the same conditions. The titania films gave also been attached to substrates-glass or indium tin oxide (ITO) surfaces-and the photoelectrochemical properties of the porous film attained. A comparison with a spin-coated titania film (prepared from the same colloidal dispersion) showed that the structured porous inorganic film has two times the photochemical efficiency as the spin-coated film.