The effect of process parameters on the Liquid Flame Spray generated titania nanoparticles

被引:43
作者
Aroma, Mikko [1 ]
Keskinen, Helmi [1 ]
Maekelae, Jyrki M. [1 ]
机构
[1] Tampere Univ, Inst Phys, Aerosol Phys Lab, FIN-33101 Tampere, Finland
来源
BIOMOLECULAR ENGINEERING | 2007年 / 24卷 / 05期
关键词
liquid flame spray; scale-up; titania; nanoparticles;
D O I
10.1016/j.bioeng.2007.08.004
中图分类号
Q5 [生物化学];
学科分类号
071010 ; 081704 ;
摘要
Nanoparticles have become important in many applications. It is essential to be able to control the particle size because the properties of nanoparticles change dramatically with particle size. An efficient way to generate nanoparticles is via aerosol processes. In this study we used Liquid Flame Spray consisting of liquid precursor droplets sprayed into a high-speed hydrogen/oxygen flame where they evaporate, vapours react and nucleate to form titania nanoparticles. Using flame methods, also dopants and sensitizers can easily be introduced in order to, e.g. improve the photocatalytic activity of the nanomaterial. To obtain a practical guideline in order to tailor the final nanoparticle size in the process, we have systematically studied the effects of different process parameters on the particle size of titania. Titania is used, e.g. as a photocatalyst, and then both particle size and crystal structure are important when looking at the efficiency. In this work, the generated nanoparticle size has been measured by aerosol instrumentation and the particle morphology has been verified with transmission electron microscopy. In Liquid Flame Spray method, there are several adjustable parameters such as precursor feed rate into the flame; concentration of the precursor; precursor material itself as well as solvent used in the precursor; mass flow of combustion gases and also the mechanical design of the torch used. We used metal organic based titanium precursors in alcohol solvents, predominantly ethanol and 2-propanol. Large differences in particle production between the precursors were found. Differences could also be seen for various solvents. As for precursor feed in the flame, the more mass is introduced the larger the nanoparticles are, i.e. precursor concentration and precursor feed rate have an impact on particle size. A similar phenomenon can be discovered for the combustion gas flow rates. Torch design also plays an important role in controlling the particle size. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:543 / 548
页数:6
相关论文
共 24 条
  • [1] *CRC, 2006, CRC HDB CHEM PHYS
  • [2] Liquid flame spraying for glass coloring
    Gross, KA
    Tikkanen, J
    Keskinen, J
    Pitkänen, V
    Eerola, M
    Siikamaki, R
    Rajala, M
    [J]. JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1999, 8 (04) : 583 - 589
  • [3] Tailor-made nanoparticles via gas-phase synthesis
    Gutsch, A
    Mühlenweg, H
    Krämer, M
    [J]. SMALL, 2005, 1 (01) : 30 - 46
  • [4] Droplet and particle dynamics during flame spray synthesis of nanoparticles
    Heine, MC
    Pratsinis, SE
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2005, 44 (16) : 6222 - 6232
  • [5] Effect of silver addition on the formation and deposition of titania nanoparticles produced by liquid flame spray
    Keskinen, H.
    Makela, J. M.
    Aromaa, M.
    Ristimaki, J.
    Kanerva, T.
    Levanen, E.
    Mantyla, T.
    [J]. JOURNAL OF NANOPARTICLE RESEARCH, 2007, 9 (04) : 569 - 588
  • [6] Generation of silver/palladium nanoparticles by liquid flame spray
    Keskinen, H
    Mäkelä, JM
    Vippola, M
    Nurminen, M
    Liimatainen, J
    Lepistö, T
    Keskinen, J
    [J]. JOURNAL OF MATERIALS RESEARCH, 2004, 19 (05) : 1544 - 1550
  • [7] KESKINEN H, 2005, ELECTROCHEM SOC P, P491
  • [8] Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal
    Keskinen, Helmi
    Makela, Jyrki M.
    Aromaa, Mikko
    Keskinen, Jorma
    Areva, Sami
    Teixeira, Cilaine V.
    Rosenholm, Jarl B.
    Pore, Viljami
    Ritala, Mikko
    Leskela, Markku
    Raulio, Mari
    Salkinoja-Salonen, Mirja S.
    Levanen, Erkki
    Mantyla, Tapio
    [J]. CATALYSIS LETTERS, 2006, 111 (3-4) : 127 - 132
  • [9] ELECTRICAL LOW-PRESSURE IMPACTOR
    KESKINEN, J
    PIETARINEN, K
    LEHTIMAKI, M
    [J]. JOURNAL OF AEROSOL SCIENCE, 1992, 23 (04) : 353 - 360
  • [10] Morphology, crystallinity, and electrochemical properties of in situ formed poly(ethylene oxide)/TiO2 nanocomposite polymer electrolytes
    Liu, Y
    Lee, JY
    Hong, L
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 89 (10) : 2815 - 2822