The performance of a centrifugal fan with enlarged impeller

被引:91
作者
Li Chunxi [1 ]
Wang Song Ling [1 ]
Jia Yakui [2 ]
机构
[1] N China Elect Power Univ, Sch Energy & Power Engn, Baoding 071003, Heibei, Peoples R China
[2] Hebei Elect Power Design & Res Inst, Shijiazhuang 050031, Hebei, Peoples R China
关键词
Centrifugal fan; Impeller enlargement; Blade tip extension; Trimming law; Noise; NOISE-REDUCTION;
D O I
10.1016/j.enconman.2011.02.026
中图分类号
O414.1 [热力学];
学科分类号
070201 [理论物理];
摘要
The influence of enlarged impeller in unchanged volute on G4-73 type centrifugal fan performance is investigated in this paper. Comparisons are conducted between the fan with original impeller and two larger impellers with the increments in impeller outlet diameter of 5% and 10% respectively in the numerical and experimental investigations. The internal characteristics are obtained by the numerical simulation, which indicate there is more volute loss in the fan with larger impeller. Experiment results show that the flow rate, total pressure rise, shaft power and sound pressure level have increased, while the efficiency have decreased when the fan operates with larger impeller. Variation equations on the performance of the operation points for the fan with enlarged impellers are suggested. Comparisons between experiment results and the trimming laws show that the trimming laws for usual situation can predict the performance of the enlarged fan impeller with less error for higher flow rate, although the situation of application is not in agreement. The noise frequency analysis shows that higher noise level with the larger impeller fan is caused by the reduced impeller-volute gap. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2902 / 2910
页数:9
相关论文
共 20 条
[1]
Effect of inlet straighteners on centrifugal fan performance [J].
Bayomi, N. N. ;
Hafiz, A. Abdel ;
Osman, A. M. .
ENERGY CONVERSION AND MANAGEMENT, 2006, 47 (18-19) :3307-3318
[2]
BEEBE RS, 2004, PREDICTIVE MAINTENAN, P136
[3]
Chambers A, 1996, POWER ENG, V100, P11
[4]
GIRDHAR P, 2004, PRACTICAL CENTRIFUGA, P56
[5]
Gülich JF, 2010, CENTRIFUGAL PUMPS, SECOND EDITION, P1, DOI 10.1007/978-3-642-12824-0
[6]
*ISO, 1999, 99061999 ISO EUR COM
[7]
Karassik I.J., 1998, CENTRIFUGAL PUMPS, V2nd
[8]
*KLEIN SCHANZL BEC, 1980, KSB CENTR PUMP LEX
[9]
Noise reduction with actively absorbing silencers [J].
Kruger, J ;
Leistner, P .
APPLIED ACOUSTICS, 1997, 51 (02) :113-120
[10]
MARTIN V, 1999, AISE STEEL TECHNOL, V76, P59