Fatigue of a laterally constrained closed cell aluminum foam

被引:58
作者
Kolluri, M. [1 ]
Mukherjee, M. [2 ]
Garcia-Moreno, F. [2 ]
Banhart, J. [2 ]
Ramamurty, U. [1 ]
机构
[1] Indian Inst Sci, Dept Mat Engn, Bangalore 560012, Karnataka, India
[2] Hahn Meitner Inst Berlin GmbH, D-14109 Berlin, Germany
关键词
foams; fatigue; aluminum; plastic deformation; strain accumulation;
D O I
10.1016/j.actamat.2007.11.004
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An experimental investigation into the constant stress amplitude compression-compression fatigue behavior of closed-cell aluminum foam, both with and without lateral constraint, was conducted. Results show that while the early stages of strain accumulation due to fatigue loading are independent of constraint, the rapid strain accumulation stage behaviors are sensitive to the constraint. This was ascribed to the noticeable hardening with plastic deformation observed under constraint during quasi-static loading, which in turn reduces the effective maximum stress experienced by the foam specimen during fatigue loading. This was demonstrated through a simple empirical model that connects fatigue strain accumulation without constraint to that under constraint. Complementary X-ray tomography experiments suggest that the fatigue behavior of the foams is relatively less sensitive to morphological defects such as missing walls than the quasi-static mechanical properties such as plastic strength. Evaluation of the energy absorption behavior suggests that the damage that accumulates during fatigue does not affect the energy-absorbing ability of the foam adversely. (c) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:1114 / 1125
页数:12
相关论文
共 29 条
[1]  
Akiyama S, 1987, U.S. Patent, Patent No. [4713277, 4,713,277]
[2]   Failure mechanisms of closed-cell aluminum foam under monotonic and cyclic loading [J].
Amsterdam, E. ;
De Hosson, J. Th. M. ;
Onck, P. R. .
ACTA MATERIALIA, 2006, 54 (17) :4465-4472
[3]   Compressive and tensile behaviour of aluminum foams [J].
Andrews, E ;
Sanders, W ;
Gibson, LJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 270 (02) :113-124
[4]  
Ashby M.F., 2000, METAL FOAMS DESIGN G
[5]   Fatigue behavior of aluminum foams [J].
Banhart, J ;
Brinkers, W .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1999, 18 (08) :617-619
[6]   Manufacture, characterisation and application of cellular metals and metal foams [J].
Banhart, J .
PROGRESS IN MATERIALS SCIENCE, 2001, 46 (06) :559-U3
[7]   Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam [J].
Bastawros, AF ;
Bart-Smith, H ;
Evans, AG .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2000, 48 (02) :301-322
[8]   Effect of imperfections on the yielding of two-dimensional foams [J].
Chen, C ;
Lu, TJ ;
Fleck, NA .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1999, 47 (11) :2235-2272
[9]   Multifunctionality of cellular metal systems [J].
Evans, AG ;
Hutchinson, JW ;
Ashby, MF .
PROGRESS IN MATERIALS SCIENCE, 1998, 43 (03) :171-221
[10]   Real-time X-ray radioscopy on metallic foams using a compact micro-focus source [J].
Garcia-Moreno, F ;
Fromme, M ;
Banhart, J .
ADVANCED ENGINEERING MATERIALS, 2004, 6 (06) :416-420