XRD, DSC, MS and RS studies of Fe75Se25 iron selenide prepared by mechano-synthesis

被引：30

作者：

Campos, CEM

de Lima, JC

Grandi, TA

Machado, KD

Drago, V

Pizani, PS

机构：

[1] Univ Fed Santa Catarina, Dept Fis, BR-88040900 Florianopolis, SC, Brazil

[2] Univ Fed Sao Carlos, Dept Fis, BR-13565905 Sao Carlos, SP, Brazil

来源：

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2004年 / 270卷 / 1-2期

基金：

巴西圣保罗研究基金会;

关键词：

nanostructures; chemical synthesis; crystal structure and symmetry; X-ray scattering; inelastic scattering;

D O I：

10.1016/j.jmmm.2003.08.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The structural evolution of an Fe75Se25 powder mixture under ball milling was investigated as a function of milling time. It was followed using the X-ray diffraction (XRD), differential scanning calorimetry (DSC), Mossbauer spectroscopy (MS) and Raman spectroscopy techniques. From the XRD patterns, it was observed that the beta-FeSe and/ or Fe7Se8 phase is formed for milling times between 3 and 60 h and the balance of non-reacted alpha-Fe powder is reduced to nanometric scale. For longer milling times no other crystalline phases were observed. The Mossbauer measurements showed small amounts of iron oxide between 3 and 10 h of milling, which was not observed for milling times longer than 20h. The DSC and MS results indicate the existence of an amorphous-like FeSe alloy with low crystallization temperature. The Raman measurements showed the characteristic natural vibration modes of the N-FeSe and/or Fe7Se8 phase. (C) 2003 Elsevier B.V. All rights reserved.

引用

页码：89 / 98

页数：10

共 24 条

[1] [Anonymous], 1984, MAGNETIC GLASSES
[2] Structural studies of cobalt selenides prepared by mechanical alloying
Campos, CEM
de Lima, JC
Grandi, TA
Machado, KD
Pizani, PS
[J]. PHYSICA B-CONDENSED MATTER, 2002, 324 (1-4) : 409 - 418
[3] GaSe formation by mechanical alloying Ga50Se50 mixture
Campos, CEM
de Lima, JC
Grandi, TA
Machado, KD
Pizani, PS
[J]. SOLID STATE COMMUNICATIONS, 2003, 126 (11) : 611 - 615
[4] Structural studies of iron selenides prepared by mechanical alloying
Campos, CEM
de Lima, JC
Grandi, TA
Machado, KD
Pizani, PS
[J]. SOLID STATE COMMUNICATIONS, 2002, 123 (3-4) : 179 - 184
[5] CAMPOS CEM, 2003, IN PRESS J MAGN MAGN
[6] Structural study of TM60Ti40 (TM = Fe, Co, Ni) amorphous alloys produced by mechanical alloying
de Lima, JC
Trichês, DM
Grandi, TA
de Biasi, RS
[J]. JOURNAL OF NON-CRYSTALLINE SOLIDS, 2002, 304 (1-3) : 174 - 181
[7] Structural study of the Zn-Se system by ball milling technique
de Lima, JC
dos Santos, VHF
Grandi, TA
[J]. NANOSTRUCTURED MATERIALS, 1999, 11 (01): : 51 - 57
[8] Mechanical alloying of Fe and Zn: Phase analysis and Mossbauer studies
deLima, JC
Borba, EC
Paduani, C
dosSantos, VHF
Grandi, TA
Rechenberg, HR
Denicolo, I
Elmassalami, M
Barbosa, AF
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 1996, 234 (01) : 43 - 47
[9] *ES MICR INC, TAPP VERS 2 2
[10] Gleiter H., 1992, Nanostructured Materials, V1, P1, DOI 10.1016/0965-9773(92)90045-Y

← 1 2 3 →