Drag reduction in the turbulent pipe flow of polymers

The paper concerns an experimental study of the fully developed turbulent pipe flow of several different aqueous polymer solutions: 0.25%, 0.3% and 0.4% carboxymethylcellulose (CMC), 0.2% xanthan gum (XG), a 0.09%/0.09% CMC/XG blend, 0.125% and 0.2% polyacrylamide (PAA). The flow data include friction factor vs. Reynolds number, mean velocity and near-wall shear rate distributions, and axial velocity fluctuation intensity u' at a fixed radial location as a laminar/turbulent transition indicator. For each fluid we also include measurements of shear viscosity, first normal-stress difference and extensional viscosity. At high shear rates we find that the degree of viscoelasticity increases with concentration (0.3% CMC is an exception) for a given polymer, and in the sequence XG, CMC/XG, CMC, PAA, whilst at low shear rates the ranking changes to CMC, CMC/XG, XG, PAA. The extensional viscosity ranking is XG/CMC, XG, CMC, PAA at high strain rates and the same as that for the viscoelasticity at low shear rates. We find that the observed drag-reduction behaviour is consistent for most part with the viscoelastic and extensional-viscosity behaviour at the low shear and strain rates typical of those occurring in the outer zone of the buffer region. Although laminar/turbulent transition is practically indiscernible from the friction factor vs. Reynolds number plots, particularly for PAA and XG, the u' level provides a very clear indicator and it is found that the transition delay follows much the same trend with elasticity/extensional viscosity as the drag reduction. (C) 1999 Elsevier Science B.V. All rights reserved.