The effect of clay distribution on the elastic properties of sandstones

The shape and location of clay within sandstones have a large impact on the P-wave and S-wave velocities of the rock. They also have a large effect on reservoir properties and the interpretation of those properties from seismic data and well logs. Numerical models of different distributions of clay - structural, laminar and dispersed clay - can lead to an understanding of these effects. Clay which is located between quartz grains, structural clay, will reduce the P-wave and S-wave velocities of the rock. If the clay particles become aligned or form layers, the velocities perpendicular to the alignment will be reduced further S-wave velocities decrease more rapidly than P-wave velocities with increasing clay content, and therefore Poisson's ratios will increase as the velocities decrease. These effects are more pronounced for compacted sandstones. Small amounts of clay that are located in the pore space will have little effect on the P-wave velocity due to the competing influence of the density effect and pore-fluid stiffening. The S-wave velocity will decrease due to the density effect and thus the Poisson's ratio will increase. When there is sufficient clay to bridge the gaps between the quartz grains, P-wave and S-wave velocities rise rapidly and the Poisson's ratios decrease. These effects are more pronounced for under-compacted sandstones. These general results are only slightly modified when the intrinsic anisotropy of the clay material is taken into account. Numerical models indicate that there is a strong, nearly linear relationship between P-wave and S-wave velocity which is almost independent of clay distribution. S-wave velocities can be predicted reasonably accurately from P-wave velocities based on empirical relationships. However, this does not provide any connection between the elastic and petrophysical properties of the rocks. Numerical modelling offers this connection but requires the inclusion of clay distribution and anisotropy to provide a model that is consistent with both the elastic and petrophysical properties. If clay distribution is ignored, predicting porosities from P-wave or S-wave data, for example, can result in large errors. Estimation of the clay distribution from P-wave and S-wave velocities requires good estimates of the porosity and clay volume and verification from petrographic analyses of core or cuttings. For a real data example, numerical models of the elastic properties suggest the predominance of dispersed clay in a fluvial sand from matching P-wave and S-wave velocity well log data using log-based estimates of the clay volume and porosity This is consistent with an interpretation of other log data.