A novel biosensing interfacial design based on the assembled multilayers of the oppositely charged polyelectrolytes

A novel biosensing interfacial design strategy has been produced by the alternate adsorption of the oppositely charged polyelectrolytes. A quartz-crystal microbalance (QCM) as a model transducer was modified by use of mercaptoacetic acid (MAA) self-assembled monolayer (SAM) and the adsorption multilayers of the oppositely charged polyelectrolytes. MAA-SAM was first applied to the gold electrode surface of the crystal, and the positively charged chitosan was used as a double-sided linker to attach the negatively charged alginate-HSA antibodies to the negatively charged MAA-SAM layer. The assembly process and conditions were studied using the real-time output device and the surface topologies of the resulting crystals were characterized by atomic force microscopy (AFM) imaging. It is discovered that the optimal pH of immobilizing antibodies was 7.2 and the suited dilution ratio of antibodies was 10:30. The proposed immunosensor in optimal conditions has a linear detection range of 12.3-184.5 mu g/mL for HSA detection. Comparing with the direct immobilization method of antibodies, the immunosensor with the proposed immobilization procedure shows some advantages, such as improved sensitivity due to the well-retained antibody activity and the significantly extended detection range. In particular, the regeneration of the developed immunosensor was simple and fast. Analytical results indicate that the developed immobilization procedure is a promising alternative for the immobilization of biorecognition element on the electrode surface. (c) 2004 Elsevier B.V. All rights reserved.