Synthesis of SBA-15 with different pore sizes and the utilization as supports of high loading of cobalt catalysts

被引:151
作者
Wang, Y [1 ]
Noguchi, M [1 ]
Takahashi, Y [1 ]
Ohtsuka, Y [1 ]
机构
[1] Tohoku Univ, Res Ctr Organ Resources & Mat Chem, Inst Chem React Sci, Aoba Ku, Sendai, Miyagi 9808577, Japan
基金
日本学术振兴会;
关键词
SBA-15; catalyst support; cobalt loading; FT synthesis;
D O I
10.1016/S0920-5861(01)00317-0
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
Several types of SBA-15 with pore diameters of 3.6-12 nm have been synthesized under different reaction conditions, followed by air calcination, and utilized as supports for loading 10-20 mass% Co catalysts. Post-synthesis heat treatment after reaction at 308 K is more effective for increasing the pore diameter and volume of SBA-15 than the addition of trimethylbenzene before reaction. The combination of the two results in the formation of SBA-15 with large pore diameter but broad size distribution and less organized structures. When an acetone, ethanol, or water solution of Co(NO3)(2) is used as a precursor for impregnation with SBA-15 with pore diameter of 3.6 nm, the average crystalline size of Co3O4 observed at 10 mass% Co exceeds the pore diameter irrespective of the kind of the solvent. On the other hand, the use of an ethanol solution of Co(CH3COO)(2) or an acetone solution of (CH3COCHCOCH3)(2)CO provides no X-ray diffraction peaks of Co3O4 even at loading as high as 20 mass% Co, and catalyst addition considerably decreases the pore volume of SBA-15 support regardless Of the pore diameter. These observations strongly suggest that Co catalysts exist as nanosized clusters inside the mesopores. The SAXS measurements show that the hexagonal mesoscopic organization of the SBA-15 support with pore diameter of 5.5 nm is almost retained even after addition of 20 mass% Co. The 20 mass% Co/SBA catalysts are also tested preliminarily in Fischer-Tropsch synthesis under 503-523 K and 2.0 MPa. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:3 / 9
页数:7
相关论文
共 13 条
[1]   SUPPORT EFFECTS IN COBALT-BASED FISCHER-TROPSCH CATALYSIS [J].
BESSELL, S .
APPLIED CATALYSIS A-GENERAL, 1993, 96 (02) :253-268
[2]  
Cheng MJ, 1999, CHEM LETT, P131
[3]   From microporous to mesoporous molecular sieve materials and their use in catalysis [J].
Corma, A .
CHEMICAL REVIEWS, 1997, 97 (06) :2373-2419
[4]   BIMETALLIC SYNERGY IN COBALT RUTHENIUM FISCHER-TROPSCH SYNTHESIS CATALYSTS [J].
IGLESIA, E ;
SOLED, SL ;
FIATO, RA ;
VIA, GH .
JOURNAL OF CATALYSIS, 1993, 143 (02) :345-368
[5]   ORDERED MESOPOROUS MOLECULAR-SIEVES SYNTHESIZED BY A LIQUID-CRYSTAL TEMPLATE MECHANISM [J].
KRESGE, CT ;
LEONOWICZ, ME ;
ROTH, WJ ;
VARTULI, JC ;
BECK, JS .
NATURE, 1992, 359 (6397) :710-712
[6]   Alumination and ion exchange of mesoporous SBA-15 molecular sieves [J].
Luan, ZH ;
Hartmann, M ;
Zhao, DY ;
Zhou, WZ ;
Kevan, L .
CHEMISTRY OF MATERIALS, 1999, 11 (06) :1621-1627
[7]   Incorporation of titanium into mesoporous silica molecular sieve SBA-15 [J].
Luan, ZH ;
Maes, EM ;
van der Heide, PAW ;
Zhao, DY ;
Czernuszewicz, RS ;
Kevan, L .
CHEMISTRY OF MATERIALS, 1999, 11 (12) :3680-3686
[8]   INTERACTION OF SINGLE AND MULTIPLE LAYERS OF COPPER ACETYLACETONATE COMPLEXES WITH SILICA SURFACES - AN INFRARED DIFFUSE-REFLECTANCE STUDY [J].
MITCHELL, MB ;
CHAKRAVARTHY, VR ;
WHITE, MG .
LANGMUIR, 1994, 10 (12) :4523-4529
[9]   Hydrothermal and postsynthesis surface modification of cubic, MCM-48, and ultralarge pore SBA-15 mesoporous silica with titanium [J].
Morey, MS ;
O'Brien, S ;
Schwarz, S ;
Stucky, GD .
CHEMISTRY OF MATERIALS, 2000, 12 (04) :898-911
[10]   The synthesis of stable, hydrophobic MCM-48/VOx catalysts, using alkylchlorosilanes as coupling agents for the molecular designed dispersion of VO(acac)2 [J].
Van der Voort, P ;
Vansant, EF .
MICROPOROUS AND MESOPOROUS MATERIALS, 2000, 38 (2-3) :385-390