Investigations on the performance and exhaust emissions of a diesel engine using preheated waste frying oil as fuel

被引:167
作者
Pugazhvadivu, M [1 ]
Jeyachandran, K
机构
[1] Pondicherry Engn Coll, Dept Mech Engn, Pondicherry 605014, India
[2] Anna Univ, Dept Mech Engn, Madras 600025, Tamil Nadu, India
关键词
waste frying oil; preheating; diesel engine; performance; emissions;
D O I
10.1016/j.renene.2005.02.001
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In. the present experimental investigation, waste frying oil anon-edible vegetable oil was used as an alternative fuel for diesel engine. The high viscosity of the waste frying oil was reduced by preheating. The properties of waste frying. oil such as viscosity, density, calorific value and flash point were determined. The effect of temperature on the viscosity of waste frying oil was evaluated. It was determined that the waste frying oil requires a heating temperature of 135 degrees C to bring down its viscosity to that of diesel at 30 degrees C. The performance and exhaust emissions of a single cylinder diesel engine was evaluated using diesel, waste frying oil (without preheating) and waste frying oil preheated to two different inlet temperatures (75 and 135 degrees C). The engine performance was improved and the CO acid smoke emissions were reduced using preheated waste frying oil: It was concluded from the results of the experimental investigation that the waste frying oil preheated to 135 degrees C could be used as a diesel fuel substitute for short-teen engine operation . (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2189 / 2202
页数:14
相关论文
共 22 条
[1]   Biodiesel development and characterization for use as a fuel in compression ignition engines [J].
Agarwal, AK ;
Das, LM .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2001, 123 (02) :440-447
[2]   Effects of preheating of crude palm oil (CPO) on injection system, performance and emission of a diesel engine [J].
Bari, S ;
Lim, TH ;
Yu, CW .
RENEWABLE ENERGY, 2002, 27 (03) :339-351
[3]  
BARSIC NJ, 1981, SAE, P173
[4]  
Heywood JB, 1988, INT COMBUST ENGINE F
[5]  
HIREGOUDARY, 2003, 18 NAT C IC ENG COMB, P601
[6]  
HURNKE AL, 1981, SAE, P2925
[7]   Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel [J].
Masjuki, HH ;
Kalam, MA ;
Maleque, MA ;
Kubo, A ;
Nonaka, T .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2001, 215 (D3) :393-404
[8]  
MURAYAMA T, 1984, SAE, V5, P292
[9]  
Muryama T, 2000, P I MECH ENG D-J AUT, V214, P141
[10]  
NAZAR J, 2003, 18 NAT C IC ENG COMB, P405