Influence of oil temperature on gear failures

Typical gear failures like wear, scuffing, micropitting and pitting are influenced by the oil temperature in the lubrication system. High temperatures lead to low viscosities and thus thin lubricant films in the gear mesh with generally detrimental influence on failure performance. On the other hand, for gear oils with additives higher temperatures correspond with higher chemical activity and, at least in some cases, with better failure performance of the lubricant. Last, but not least, at very high temperatures even metallurgical changes have been found with a reduction in material endurance limits. Examples for the influence of oil temperature on gear failure modes, as well as their introduction into load carrying capacity calculation methods are shown. With this background, the often-applied practice of increasing the severity of a gear oil test method by increasing the oil temperature has to be revised. Adequate solutions are discussed. (C) 2003 Elsevier Ltd. All rights reserved.