Resolving orthoclase dissolution processes with atomic force microscopy and X-ray reflectivity

被引:97
作者
Teng, HH [1 ]
Fenter, P [1 ]
Cheng, LW [1 ]
Sturchio, NC [1 ]
机构
[1] Argonne Natl Lab, Div Environm Res, Argonne, IL 60439 USA
关键词
D O I
10.1016/S0016-7037(01)00665-2
中图分类号
P3 [地球物理学]; P59 [地球化学];
学科分类号
0708 ; 070902 ;
摘要
Direct measurements of orthoclase (001) were pet-formed using in situ atomic force microscopy (AFM) and synchrotron X-ray reflectivity to reveal the Angstrom -scale dissolution process as a function of pH and temperature. Distinct processes were observed, involving mainly terrace roughening at pH = 1.1 and step motion at pH = 12.9. A gel-like surface coating was observed to form at acidic pH under slow fluid flow-rate conditions. No coating was observed either at alkaline pH or at acidic pH under high fluid flow-rate conditions. The corresponding dissolution rates were measured directly at pH = 1.1 and 12.9 at similar to 50 degreesC using real-time X-ray reflectivity measurements, and reacted interface structures were derived from crystal truncation rod measurements after reaction at both acidic and alkaline pH. Our observations reveal, under these experimental conditions, that 1) orthoclase dissolution is controlled by at least two separate surface reactions having distinct reactive sites; 2) dissolution is stoichiometric at alkaline pH and only minimally nonstoichiometric (limited to one unit-cell depth) at acidic pH: previously identified nonstoichiometric layer thicknesses derived from macroscopic measurements are associated with the formation of the gel-like coatings; 3) dissolution rates measured at freshly cleaved (001) surfaces are comparable to those derived from steady-state powder dissolution rates for both alkaline and acidic pH; and 4) elevated transient dissolution rates are not observed for freshly cleaved surfaces but are obtained under alkaline conditions after reacting the orthoclase (001) surface at acidic pH, These observations clarify differences in orthoclase dissolution mechanisms as a function of pH, demonstrate the utility of AFM and X-ray scattering methods for measuring Angstrom -scale structures and face-specific dissolution rates on single crystals and place new constraints on the understanding of alkali feldspar weathering processes. Copyright (C) 2001 Elsevier Science Ltd.
引用
收藏
页码:3459 / 3474
页数:16
相关论文
共 52 条
[1]  
Berner R.A., 1981, REV MINERAL, P111
[2]   THE CARBONATE-SILICATE GEOCHEMICAL CYCLE AND ITS EFFECT ON ATMOSPHERIC CARBON-DIOXIDE OVER THE PAST 100 MILLION YEARS [J].
BERNER, RA ;
LASAGA, AC ;
GARRELS, RM .
AMERICAN JOURNAL OF SCIENCE, 1983, 283 (07) :641-683
[3]   MECHANISM OF FELDSPAR WEATHERING .2. OBSERVATIONS OF FELDSPARS FROM SOILS [J].
BERNER, RA ;
HOLDREN, GR .
GEOCHIMICA ET COSMOCHIMICA ACTA, 1979, 43 (08) :1173-1186
[4]  
Bethke C.M., 1996, Geochemical Reaction Modeling: Concepts and Applications
[5]  
Bevington P.R., 1969, DATA REDUCTION ERROR
[6]   THE ROLE OF SURFACE SPECIATION IN THE DISSOLUTION OF ALBITE [J].
BLUM, AE ;
LASAGA, AC .
GEOCHIMICA ET COSMOCHIMICA ACTA, 1991, 55 (08) :2193-2201
[7]  
BLUML M, 1995, CUR I ELECTR MODEL, V1, P1
[8]  
Brantley SL, 1995, REV MINERAL, V31, P119
[9]  
Brantley SL, 1997, AM J SCI, V297, P1021
[10]  
BUNKER BC, 1988, PHYS CHEM GLASSES, V29, P106