Use of heat emitted by broken optic fibers: A new approach for damage detection in composites

被引：1

作者：

Pevzner, P ^{[1
]}

Weller, T ^{[1
]}

Berkovits, A ^{[1
]}

机构：

[1] Technion Israel Inst Technol, Fac Aerosp Engn, IL-32000 Haifa, Israel

来源：

ENGINEERING FAILURE ANALYSIS | 2005年 / 12卷 / 06期

关键词：

composite materials; damage detection; optic fibers; heat transfer; infrared photography;

D O I：

10.1016/j.engfailanal.2004.12.019

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Optic fibers, stripped of their jacket, weakened and embedded in a composite plate structure, cracked due to the occurrence of cracks and delaminations in the composite. At the location of a crack in a fiber, transmitted laser-light energy was converted into thermal energy, causing the temperature in the neighborhood of the crack to rise. The temperature change was detected with the aid of an infrared camera. Dynamic numerical simulations of the heat development in the vicinity of the fiber crack were performed. An analytical solution of the temperature distribution on the surface of the composite plate above a fiber crack was also developed. Both analytical and numerical results showed the feasibility of detecting and monitoring the hot spot on the composite plate caused by optic fiber cracking, by use of infrared emission from the fibers. This was successfully confirmed in experiment. The influence of parameters such as depth of the fiber below the surface of the plate, heat conductivity coefficient and light power, on the temperature distribution was also studied. Ultrasound scan of the damaged plate confirmed the accuracy of the hot-spot method in defining the damaged area. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：860 / 874

页数：15

共 11 条

[1]

ANDREWS JP, 1995, P SOC PHOTO-OPT INS, V2443, P308, DOI 10.1117/12.208325

[2]

Buckley L. J., 1992, Smart Materials and Structures, V1, P1, DOI 10.1088/0964-1726/1/1/001

[3] OPTICAL FIBER DAMAGE DETECTION FOR AN AIRCRAFT COMPOSITE LEADING-EDGE [J].

GLOSSOP, NDW ;

DUBOIS, S ;

TSAW, W ;

LEBLANC, M ;

LYMER, J ;

MEASURES, RM ;

TENNYSON, RC .

COMPOSITES, 1990, 21 (01) :71-80

[4]

GLOSSOP NDW, 1988, THESIS U TORONTO

[5]

GU XL, 1999, J INTEL MAT SYST STR, V10

[6]

Hughes T. J. R., 2012, The finite element method: linear static and dynamic finite element analysis

[7]

LEBLANC M, 1990, THESIS UTIAS

[8]

LEBLANC M, FIBER OPTIC SMART ST, V1170, P196

[9]

MASALKAR PJ, 1995, P SOC PHOTO-OPT INS, V2443, P230, DOI 10.1117/12.208260

[10]

MEASURES RM, 1990, CASI M MAY

← 1 2 →