Fabrication and properties of triplex NiCrAlY/nano Al2O3•13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method

被引:39
作者
Daroonparvar, Mohammadreza [1 ]
Yajid, Muhamad Azizi Mat [1 ]
Yusof, Noordin Mohd [1 ]
Bakhsheshi-Rad, Hamid Reza [1 ]
机构
[1] Univ Teknol Malaysia, Fac Mech Engn, Dept Mat Mfg & Ind Engn, Johor Baharu 81310, Johor, Malaysia
关键词
Ceramics; Coating materials; Microstructure; Scanning electron microscopy; SEM; THERMAL BARRIER COATINGS; CORROSION BEHAVIOR; MG ALLOY; FORMATION MECHANISM; COMPOSITE COATINGS; RESISTANCE; AL; OXIDATION; ALUMINUM; TITANIUM;
D O I
10.1016/j.jallcom.2015.05.106
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070305 [高分子化学与物理];
摘要
In this study, plasma sprayed multilayered coatings were successfully applied on the Mg alloys. On the other hand, corrosion behaviors of the coated magnesium alloy substrates with three different plasma sprayed coatings consisting of NiCrAlY, NiCrAlY/nano Al2O3 center dot 13%TiO2 and NiCrAlY/nano Al2O3 center dot 13%TiO2/nano TiO2 coatings were elaborated in 3.5 wt% NaCl solution. Electrochemical studies depicted that the novel coating (NiCrAlY/nano Al2O3 center dot 13%TiO2/nano TiO2) is able to reduce the corrosion rate of the Mg alloy and increase impedance values compared to the other samples. In fact, TiO2 sealing layer could fill some micro-pores in the Al2O3-13 wt%TiO2 coating and could prevent the concentration of the electrolyte in the Al2O3-13 waTiO(2) coating. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:450 / 466
页数:17
相关论文
共 51 条
[1]
Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg-Zn-Mn-Ca alloy [J].
Bakhsheshi-Rad, H. R. ;
Hamzah, E. ;
Daroonparvar, M. ;
Yajid, M. A. M. ;
Medraj, M. .
SURFACE & COATINGS TECHNOLOGY, 2014, 258 :1090-1099
[2]
In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg-Ca alloys for biomedical applications [J].
Bakhsheshi-Rad, H. R. ;
Hamzah, E. ;
Daroonparvar, M. ;
Ebrahimi-Kahrizsangi, R. ;
Medraj, M. .
CERAMICS INTERNATIONAL, 2014, 40 (06) :7971-7982
[3]
Mechanical and bio-corrosion properties of quaternary Mg-Ca-Mn-Zn alloys compared with binary Mg-Ca alloys [J].
Bakhsheshi-Rad, H. R. ;
Idris, M. H. ;
Abdul-Kadir, M. R. ;
Ourdjini, A. ;
Medraj, M. ;
Daroonparvar, M. ;
Hamzah, E. .
MATERIALS & DESIGN, 2014, 53 :283-292
[4]
AC impedance spectroscopy in characterizing time-dependent corrosion of AZ91 and AM50 magnesium alloys -: Characterization with respect to their microstructures [J].
Baril, G ;
Blanc, C ;
Pébère, N .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (12) :B489-B496
[5]
Characterisation by EIS of ternary Mg alloys synthesised by mechanical alloying [J].
Brett, CMA ;
Dias, L ;
Trindade, B ;
Fischer, R ;
Mies, S .
ELECTROCHIMICA ACTA, 2006, 51 (8-9) :1752-1760
[6]
Biodegradation kinetics of modified magnesium-based materials in cell culture medium [J].
Carboneras, M. ;
Garcia-Alonso, M. C. ;
Escudero, M. L. .
CORROSION SCIENCE, 2011, 53 (04) :1433-1439
[7]
Corrosion behaviour of thermally sprayed Al and Al/SiCp composite coatings on ZE41 magnesium alloy in chloride medium [J].
Carboneras, M. ;
Lopez, M. D. ;
Rodrigo, P. ;
Campo, M. ;
Torres, B. ;
Otero, E. ;
Rams, J. .
CORROSION SCIENCE, 2010, 52 (03) :761-768
[8]
Improvement of corrosion properties in an aluminum-sprayed AZ31 magnesium alloy by a post-hot pressing and anodizincy treatment [J].
Chiu, LH ;
Chen, CC ;
Yang, CF .
SURFACE & COATINGS TECHNOLOGY, 2005, 191 (2-3) :181-187
[9]
Heat-treatment induced material property variations of Al-coated Mg alloy prepared in aluminum chloride/1-ethyl-3-methylimidazolium chloride ionic liquid [J].
Chuang, Mu-Huan ;
Chang, Jeng-Kuei ;
Tsai, Pin-Ju ;
Tsai, Wen-Ta ;
Deng, Ming-Jay ;
Sun, I-Wen .
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (01) :200-204
[10]
Porosity evaluation of protective coatings onto steel, through electrochemical techniques [J].
Creus, J ;
Mazille, H ;
Idrissi, H .
SURFACE & COATINGS TECHNOLOGY, 2000, 130 (2-3) :224-232