Parameterization of the porous-material model for sand with different levels of water saturation

The experimental results for the mechanical response of sand (at different levels of saturation with water) under shock-loading conditions generated by researchers at Cavendish [Bragov AM, Lomunov AK, Sergeichev IV, Tsembelis K, Proud WG. The determination of physicomechanical properties of soft soils from medium to high strain rates, November 2005, in preparation; Chapman DJ. Tsembelis K, Proud WG. The behavior of water saturated sand under shock-loading. In: Proceedings of the 2006 SEM annual conference and exposition on experimental and applied mechanics, vol. 2, 2006.p.834-40] are used to parameterize our recently developed material model for sand [Grujicic M, Pandurangan B, Cheeseman B. The effect of degree of saturation of sand on detonation phenomena associated with shallow-buried and ground-laid mines. J Shock Vib 2006; 13:41-6 1]. The model was incorporated into a 'general-purpose non-linear dynamics simulation program to carry out a number of simulation analyses pertaining to the detonation of a landmine buried in sand and to the interactions of the detonation products, mine fragments and sand ejecta with various targets. A comparison of the computed results with their experimental counterparts revealed a somewhat improved agreement with the experimental results in the case of the present model as compared to the agreement between the widely used porous-material/compaction model for sand and the experiments. (c) 2007 Elsevier Ltd. All rights reserved.