Development of a Phytopharmaceutical Intermediate Product via Spray Drying

被引:30
作者
Couto, R. O. [2 ]
Araujo, R. R. [1 ]
Tacon, L. A. [1 ]
Conceicao, E. C. [2 ]
Bara, M. T. F. [2 ]
Paula, J. R. [2 ]
Freitas, L. A. P. [1 ]
机构
[1] Univ Sao Paulo, Fac Ciencias Farmaceut Ribeirao Preto, BR-14040903 Ribeirao Preto, SP, Brazil
[2] Univ Fed Goias, Fac Farm, Goiania, Go, Brazil
基金
巴西圣保罗研究基金会;
关键词
Factorial design; Medicinal plant; Pharmaceutical excipients; Tableting properties; POWDER TECHNOLOGY; MEDICINAL-PLANTS; DRIED PROPOLIS; EXTRACT; QUALITY; MICROENCAPSULATION; RETENTION; ADJUVANTS; TABLETS;
D O I
10.1080/07373937.2010.524062
中图分类号
TQ [化学工业];
学科分类号
081705 [工业催化];
摘要
The influence of concentration and incorporation time of different drying excipients on the processing yields and physical properties of Eugenia dysenterica DC spray-dried extracts were investigated following a factorial design. Under the established conditions, the process yield ranged from 57.55 to 89.14%, and in most experiments, the recovered products presented suitable flowability and compressibility, as demonstrated by the Hausner factor, Carr index, and angle of repose. Additionally, in a general way, the parameters related to the dried products' flowability varied over a range acceptable for pharmaceutical purposes. An analysis of variance (ANOVA) proved that both factors and some of their interactions significantly affected most of the investigated responses at different levels. Mannitol proved to be an interesting alternative as an excipient for the drying of herbal extracts, even at low concentrations such as 12.5%. Furthermore, these results imply that the best condition to obtain dry extracts of E. dysenterica with high performance and adequate pharmacotechnical properties involves the lowest concentration and the highest incorporation time of mannitol.
引用
收藏
页码:709 / 718
页数:10
相关论文
共 53 条
[1]
Akerele O., 1993, HerbalGram, V28, P13
[2]
Spray drying of biopharmaceuticals: Stability and process considerations [J].
Ameri, Mahmoud ;
Maa, Yuh-Fun .
DRYING TECHNOLOGY, 2006, 24 (06) :763-768
[3]
[Anonymous], 2008, US PHARM
[4]
The Preparation of Ternary Solid Dispersions of an Herbal Drug via Spray Drying of Liquid Feed [J].
Araujo, R. R. ;
Teixeira, C. C. C. ;
Freitas, L. A. P. .
DRYING TECHNOLOGY, 2010, 28 (03) :412-421
[5]
*ATH, 2001, BRAZ PHARM
[6]
Aulton M.E., 2001, PHARM SCI DOSAGE FOR
[7]
Moisture sorption isotherm characteristics of freeze-dried D-limonene emulsions in modified chitosan and maltodextrin [J].
Borgognoni, Camila Figueiredo ;
Polakiewicz, Bronislaw ;
de Moraes Pitombo, Ronaldo Nogueira .
DRYING TECHNOLOGY, 2008, 26 (07) :956-962
[8]
Hot melt granulation of coarse pharmaceutical powders in a spouted bed [J].
Borini, G. B. ;
Andrade, T. C. ;
Freitas, Luis A. P. .
POWDER TECHNOLOGY, 2009, 189 (03) :520-527
[9]
BOX M, 1978, STAT EXPT
[10]
PHYSICAL CHARACTERIZATION OF PHARMACEUTICAL SOLIDS [J].
BRITTAIN, HG ;
BOGDANOWICH, SJ ;
BUGAY, DE ;
DEVINCENTIS, J ;
LEWEN, G ;
NEWMAN, AW .
PHARMACEUTICAL RESEARCH, 1991, 8 (08) :963-973