Mechanical properties and morphologies of poly(ether ketone ketone) /glass fibers/mica ternary composites

被引：33

作者：

Gan, DJ ^{[1
]}

Cao, WJ ^{[1
]}

Song, CS ^{[1
]}

Wang, ZJ ^{[1
]}

机构：

[1] Nanchang Inst Technol, Dept Mat Sci & Engn, Nanchang 330034, Jiangxi, Peoples R China

来源：

MATERIALS LETTERS | 2001年 / 51卷 / 02期

关键词：

poly(ether ketone ketone); composites; mechanical properties; frictional behavior;

D O I：

10.1016/S0167-577X(01)00276-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Poly(ether ketone ketone) (PEKK) composites were developed using glass fibers (GF) and mica as combining fillers. For the composites having 30 wt% of the total fillers, the highest tensile strength was observed at the filler containing ca. 50 wt% of mica. Partial replacement of GF with mica resulted in reduced coefficient of friction and wearing rate of the materials. The fractured surface of the composites did not have large voids and microcracks. (C) 2001 Elsevier Science B.V. All rights reserved.

引用

页码：120 / 124

页数：5

共 22 条

[1]

[Anonymous], PRINCIPLES POLYM COM

[2]

Bowden F. P., 1964, The friction and lubrication of Solids, Part II

[3]

CAKMAK M, 1997, PLAST ENGN, V41, P931

[4]

DAVIES P, 1993, ADV THERMOPLAST COMP, V1, P141

[5] PROPERTIES AND ECONOMICS OF MICA-REINFORCED PLASTICS RELATED TO PROCESSING CONDITIONS [J].

FENTON, M ;

HAWLEY, G .

POLYMER COMPOSITES, 1982, 3 (04) :218-229

[6] EFFECTS OF STEEL COUNTERFACE ROUGHNESS AND TEMPERATURE ON THE FRICTION AND WEAR OF PE(E)K COMPOSITES UNDER DRY SLIDING CONDITIONS [J].

FRIEDRICH, K ;

KARGERKOCSIS, J ;

LU, Z .

WEAR, 1991, 148 (02) :235-247

[7] Physical properties of poly(ether ketone ketone)/mica composites: effect of filler content [J].

Gan, DJ ;

Lu, SQ ;

Song, CS ;

Wang, ZJ .

MATERIALS LETTERS, 2001, 48 (05) :299-302

[8]

HUGHES OR, 1996, Patent No. 9641836

[9] Multicomponent compounding of polypropylene [J].

Jarvela, PA ;

Jarvela, PK .

JOURNAL OF MATERIALS SCIENCE, 1996, 31 (14) :3853-3860

[10] MECHANICAL-PROPERTIES OF POLY(ETHER-ETHER-KETONE) FOR ENGINEERING APPLICATIONS [J].

JONES, DP ;

LEACH, DC ;

MOORE, DR .

POLYMER, 1985, 26 (09) :1385-1393

← 1 2 3 →