Process integration for energy and water saving, increasing efficiency and reducing environmental impact

被引：21

作者：

Klemes, Jiri Jaromir ^{[1
]}

Varbanov, Petar Sabev ^{[1
]}

Pierucci, Sauro ^{[2
]}

机构：

[1] Univ Pannonia, Res Inst Chem & Proc Engn, EC Marie Curie Chair EXC INEMAGLOW, FIT,Ctr Proc Integrat & Intensificat CPI 2, H-8200 Veszprem, Hungary

[2] Politecn Milan, CMIC, I-20133 Milan, Italy

来源：

APPLIED THERMAL ENGINEERING | 2010年 / 30卷 / 16期

关键词：

Process integration; Mathematical modelling and optimisation; Energy efficiency; Energy and water saving; Sodium hypophosphite production; Hydro-desulphurisation; Kraft pulp mill; Waste to energy; Heat exchangers; PRES conference; POLLUTION REDUCTION; HEAT INTEGRATION; SPECIAL-ISSUE; OPTIMIZATION; MINIMIZATION; MANAGEMENT; RETROFIT; SYSTEMS;

D O I：

10.1016/j.applthermaleng.2010.07.025

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This article provides an introduction to the current Special Issue of the journal of Applied Thermal Engineering, which contains eight carefully selected articles from the 12th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction - PRES'09. This issue builds upon the multi-year co-operation between the PRES conference planners and the journal. The articles cover important subjects of increased energy and resource efficiency in industrial production and emission reduction. The first paper is based on the conference plenary presentation and is providing an overview of the historical developments in the Process Integration (PI) area and the apparently significant contribution of the PRES series of conferences. This is followed by a second group of two papers dedicated to important PI topics - retrofit of Heat Exchanger Networks and simultaneous minimisation of water and energy consumption. The third group contains three contributions dedicated to energy savings via the application of PI in specific industrial sectors. The final fourth group of two papers is dedicated to the implementation of energy conversion technologies. Those papers are discussing environmental impact of waste-to-energy processes and heat exchanger improvements. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：2265 / 2269

页数：5

共 36 条

[1] An automated approach for heat exchanger network retrofit featuring minimal topology modifications [J].

Asante, NDK ;

Zhu, XX .

COMPUTERS & CHEMICAL ENGINEERING, 1996, 20 :S7-S12

[2] Clean technologies: design aspects [J].

Bulatov, Igor ;

Klemes, Jiri .

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2010, 12 (02) :87-90

[3] Towards cleaner technologies: emissions reduction, energy and waste minimisation, industrial implementation [J].

Bulatov, Igor ;

Klemes, Jiri .

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2009, 11 (01) :1-6

[4] Cleaner energy for sustainable future [J].

Dovi, Vincenzo Giorgio ;

Friedler, Ferenc ;

Huisingh, Donald ;

Klemes, Jiri Jaromir .

JOURNAL OF CLEANER PRODUCTION, 2009, 17 (10) :889-895

[5] Process integration, modelling and optimisation for energy saving and pollution reduction [J].

Friedler, Ferenc .

APPLIED THERMAL ENGINEERING, 2010, 30 (16) :2270-2280

[6] Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction [J].

Friedler, Ferenc .

PRES'09: 12TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, PTS 1 AND 2, 2009, 18 :1-26

[7]

GADALLA MA, 2002, THESIS UMIST MANCHES

[8]

Hohmann EC, 1971, THESIS U SO CALIFORN

[9] Pathways to a sustainable European kraft pulp industry: Trade-offs between economy and CO2 emissions for different technologies and system solutions [J].

Jonsson, Johanna ;

Algehed, Jessica .

APPLIED THERMAL ENGINEERING, 2010, 30 (16) :2315-2325

[10] Special issue: Process integration, modelling and optimisation for energy saving and pollution reduction (PRES'99) [J].

Klemes, J ;

Friedler, F .

APPLIED THERMAL ENGINEERING, 2000, 20 (15-16) :1335-1335

← 1 2 3 4 →