Uphill permeation model of gold(III) and its separation from base metals using thiourea derivatives as ionophores across a liquid membrane

被引:43
作者
El Aamrani, FZ
Kumar, A
Beyer, L
Cortina, JL
Sastre, AM
机构
[1] Univ Politecn Catalunya, ETSEIB, Dept Chem Engn, E-08028 Barcelona, Spain
[2] Univ Leipzig, Dept Inorgan Chem, D-04103 Leipzig, Germany
关键词
uphill permeation model; gold(III); thiourea derivatives; ionophores; liquid membrane; polymer-immobilised liquid membrane;
D O I
10.1016/S0304-386X(98)00068-1
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
This work deals with carrier-facilitated membrane transport of Au(III) from chloride media across a polymer-immobilised liquid membrane (PILM) using as organic reagents N-(thiocarbamoyl)benzamide derivatives and N-benzoylthiourea derivatives, denoted as 2a-c and 3a-f, respectively. Both the composition of the organic membrane solvent and the type of carrier have a marked effect on gold permeation. Recovery and permeability of gold using 2a-c and 3a-f across a PILM proceed in the following order: 3e approximate to 3d approximate to 3e much greater than 3f > 3b approximate to 3a approximate to 2a approximate to 2b approximate to 2c, In view of the performance of these carriers, 3c was selected as a metal receptor for detailed studies of Au(III) in permeation. A model is presented for the permeation of Au(III) (61 mu M) in 0.5 M Cl- at pH 2.5 using 3c as a membrane carrier. The mathematical equations describing the rate of permeation are derived to correlate the membrane permeability coefficient with diffusional and equilibrium parameters. The mass transfer coefficient was calculated from the described model as 1.1 x 10(-5) m s(-1), and the thickness of the aqueous boundary was later calculated to be 65 mu m Several polymeric supports were tested for impregnation of the organic extractant, and Durapore (Millipore) afforded the maximum flux for Au(III), yielding a value of 1.1 x 10(-14) mol m(-2) s, The relationship between flux and support characteristics is derived and a mathematical equation is presented, Of the several diluents used, cumene had the most satisfactory performance in terms of FILM stability and metal transport. Of the different reagents used, 0.5 M sodium thiocyanate in 0.5 M NaCl at pH 2.5 served most efficiently as the stripping agent. More than 80% of the Au(III) could be readily separated using 3c in the presence of various metals such as Cu(II), Fc(III) and Zn(II). (C) 1998 Published by Elsevier Science B.V. All rights reserved.
引用
收藏
页码:315 / 330
页数:16
相关论文
共 25 条
[1]  
ADAMSON RJ, 1972, GOLD METALLURGY S AF, P452
[2]  
AFZALSINOVA NG, 1986, PREPRINTS ISEC 86
[3]   NEW SULFUR-CONTAINING REAGENTS AS CARRIERS FOR THE SEPARATION OF PALLADIUM BY SOLID SUPPORTED LIQUID MEMBRANES [J].
ANTICO, E ;
MASANA, A ;
HIDALGO, M ;
SALVADO, V ;
VALIENTE, M .
HYDROMETALLURGY, 1994, 35 (03) :343-352
[4]  
ARGIROPOULOS G, 1996, P INT SOLV EXTR C IS, V1, P123
[5]  
ASFARI Z, 1996, ACS SYM SER, V642, P376
[6]  
BEYER L, 1984, TETRAHEDRON, V40, P229
[7]  
*CELG, 1988, MICR MEMBR DAT SHEET
[8]  
COX M, 1987, SEPARATION PROCESSES, P321
[9]  
DANESI PR, 1988, DEV SOLVENT EXTRACTI, P159
[10]  
ELAAMRANI FZ, 1998, IN PRESS SOLVENT EXT